6215-C-HRS

Bearing - 1209 MGM

45 × 85 × 19 mm. MGM bearing for industrial applications. When replacing a part, always verify the complete designation, dimensions, design and application requirements against the manufacturer documentation.

Bearing - 6005 2RS SKF

25 × 47 × 12 mm. deep-groove ball bearing is a single-row radial bearing with rubber seals on both sides. It carries radial loads and moderate axial forces in either direction. The 2RS design helps protect the internal rolling contact from dust and moisture while retaining lubricant inside the bearing.

Bearing - 6216 2RS1 C3 SKF

80 × 140 × 26 mm. Rolling bearing for use in machinery and equipment.

Bearing - NU1040-XL-M1 FAG

Bearing - is a single-row cylindrical roller bearing in NU design with a solid brass M1 cage, cylindrical bore, no seals and normal. Cn clearance. It is an X-Life bearing. Dimensions: inner diameter d 200 mm, outer diameter D 310 mm, width B 51 mm; weight 14.6 kg. NU bearings carry radial forces and allow axial displacement in both directions, making them suitable as floating….

Bearing - 6000 SKF

10 × 26 × 8 mm. Technické provedení a kompatibilitu ověřte podle úplného označení výrobce a požadavků aplikace.

Bearing - NU 2205 KINEX

25 × 52 × 18 mm. Technické provedení a kompatibilitu ověřte podle úplného označení výrobce a požadavků aplikace.

Bearing - 6000 2RSH SKF

10 × 26 × 8 mm. single-row deep groove ball bearing with contact rubber seals on both sides. A compact solution for radial and moderate axial loads in both directions, protected against dust, contamination and lubricant loss.

Bearing - 61903 2RS ZVL

17 × 30 × 7 mm. Rubber seals on both sides. Thin-section ZVL single-row deep groove ball bearing for installations with limited radial space.

Bearing - 607 2Z EU

7 × 19 × 6 mm. Metal shields on both sides.

Bearing - 22313 M ZKL

65 × 140 × 48 mm. double-row spherical roller bearing with a solid machined brass cage. Its self-aligning design carries high radial loads, axial loads in both directions and accommodates operating misalignment.

Bearing - 30204 A KLF

20 × 47 × 15.25 mm. single-row tapered roller bearing for combined radial and axial loads acting in one direction. Its separable design simplifies installation and accurate clearance adjustment.