Bearings
Product sorting
List of products
120x215x58 mm
22224 E SKF double-row spherical roller bearing with high load capacity and a self-aligning design for heavy-duty arrangements subject to misalignment.
120x215x43.5 mm
30224 A URB tapered roller bearing is a robust single-row bearing for high radial loads combined with axial load in one direction. Its separable design allows the inner ring with rollers and the outer ring to be mounted independently. For a correct replacement, compare the complete designation including suffix A, the dimensions and required clearance with the original part.
100 × 215 × 73 mm
The 22320 E SKF spherical roller bearing is a double-row self-aligning bearing for very high radial loads and simultaneous axial loads in both directions. Its spherical outer-ring raceway helps accommodate misalignment between the shaft and housing.
This robust open bearing has a cylindrical bore and is intended for demanding industrial applications with suitable lubrication.
100x215x73 mm
Spherical roller bearing 22320 KM ZKL with a tapered bore and machined brass cage for high radial loads and axial loads in both directions. Its self-aligning design helps accommodate misalignment and shaft deflection.
Greater radial internal clearance
Single-row angular-contact ball bearing, high precision, 7320 BECBM SKF. Dimensions 100 × 215 × 47 mm, 40° contact angle, brass cage, CB normal axial clearance and EAN 7316577095091. Weight: 8.39 kg (ABF) and 8.004 kg (Albeco). Albeco reports dynamic load rating 216000 N, limiting speed 5000 rpm and reference speed 3800 rpm; precision is P6 (better than normal).
100x215x47 mm
Higher accuracy class P6
ZKL bearing with the complete designation NU 320 P6 NA ZKL.
Greater radial internal clearance
100x215x47 mm
Rolling bearing 6320 M ZKL for use in machinery and equipment.
120 × 215 × 58 mm
SKF 22224 EK/C4 spherical roller bearing with K 1:12 tapered bore, C4 radial clearance and W33 lubrication groove.
SKF 22224 E/C4 spherical roller bearing for very high radial loads and axial loads in both directions.
SKF 1224/C3 double-row self-aligning ball bearing
1224/C3 SKF is an open double-row self-aligning ball bearing without seals. It has a cylindrical bore, standard steel cage and C3 increased radial clearance.
Dimensions: inner diameter d 120 mm, outer diameter D 215 mm, width B 42 mm. The spherical outer-ring raceway allows the bearing to compensate for shaft and housing misalignment. It is suitable for high radial loads and lower axial loads in both directions, with low friction.
120x215x40 mm
FAG bearing with the complete designation NU 224 E XL M1 FAG. When selecting a replacement, compare the full designation, dimensions and design required for the application.
Large radial internal clearance
Greater radial internal clearance
NJ2320ECML/C3 SKF
single-row cylindrical roller bearing with NJ design
100 × 215 × 73 mm
ML brass cage, ring-centered
C3 internal clearance
Practical advice
How to choose the right bearing
The same dimensions do not necessarily mean the same function. When selecting a replacement, check the construction, cover and seal design, internal clearance, and the conditions in which the bearing will operate.
Determine the type and size
Copy the full type designation. If missing, measure the inner diameter d, outer diameter D and width B.
Check the design
Distinguish open bearing, metal shields, and rubber seals. Also check internal clearance, accuracy, cage, and lubricant.
Take operating conditions into account
Rotational speed, direction, and magnitude of mechanical load, temperature, humidity, dust, and the method of installation are decisive.
How to read the type designation 6204 2RS C3
Suffixes may vary between manufacturers. When replacing, compare technical parameters, not just similar type designation.
Open, 2Z, or 2RS?
When are matching dimensions not enough?
A dimensionally identical bearing may have different load capacity, maximum speed, precision, or internal clearance. Pay special attention to electric motors, high temperatures, vibrations, shocks, and dusty or humid environments.
- radial, axial, and combined loads
- normal or increased internal clearance C3/C4
- operating temperature and maximum speed
- design of shields and seals, lubricant, cage material, and precision
Frequently asked questions
Can I replace a bearing with another brand?
Usually yes, if the design type, dimensions, internal clearance, precision, cover and seal design, load capacity, and allowable speeds match. The basic number alone is not enough; the meaning of the suffixes may vary according to the manufacturer.
How do I determine the diameter of the inner bore from the model designation?
For many common metric bearings, the bore diameter code from 04 is multiplied by five: for example, 04 = 20 mm and 06 = 30 mm. Codes 00 to 03 and some special designs have different rules, so it is advisable to verify the dimension.
Is 2RS better, or 2Z?
Neither is universally better. 2RS usually protects better against dirt and moisture, while 2Z tends to have lower friction and allows higher speeds. The right choice depends on the application.
What to send if the type designation is unreadable?
A photo of both sides, dimensions d × D × B, machine type, and information about speed, load, temperature, humidity, or dustiness. The more operational data we know, the more safely a replacement can be recommended.
Not sure about the replacement?
Send the type designation, dimensions, or a photo of the original part. We will help verify the suitable version before ordering.