Bearing - 1202 CRF
Related products
60x130x46 mm
ZKL 22312 KW33J double-row spherical roller bearing with a 1:12 tapered bore, W33 lubrication groove and three holes, and a J steel cage. The self-aligning design carries high radial loads together with axial loads in both directions.
17x47x14 mm
6303 2Z ZVL deep-groove ball bearing with metal shields on both sides.
40x80x18 mm
Metal shields on both sides
ZKL 6208 2Z single-row deep-groove ball bearing with a steel cage and non-contact shielding. Low friction and shields on both sides help retain the lubricant inside the bearing.
9x26x8 mm
SKF 629 2Z single-row deep-groove ball bearing with non-contact metal shields on both sides. A compact low-friction design for radial and limited axial loads in both directions.
30x47x11 mm
Single-direction ZKL thrust ball bearing for carrying axial load in one direction.
60x150x35 mm
Open 6412 ZKL deep-groove ball bearing.
20x47x20 mm
ZKL 3204 double-row angular contact ball bearing in an open design.
For combined radial and axial loads in either direction.
5x13x4 mm
Miniature single-row IBB 695 2Z deep groove ball bearing with non-contact sheet-steel shields on both sides. A compact design for small mechanisms requiring low friction and protection of the lubricant from ordinary contaminants.
15x35x11 mm
ZKL 6202 2RS P66 single-row deep-groove ball bearing with rubber seals on both sides. A versatile design for radial and limited axial loads in both directions, protected against common contaminants. Also compare the additional P66 designation when selecting a replacement.
25x62x17 mm
Single-row SKF Explorer 6305-2Z/C3GJN deep groove ball bearing with non-contact sheet-steel shields on both sides and C3 radial internal clearance. The grease-lubricated design is suitable for high rotational speeds.
40x90x25.25 mm
ZKL 30308 AJ2 single-row tapered roller bearing for high combined radial and axial loads. Its separable design accommodates axial load in one direction and allows accurate adjustment of clearance or preload during installation.
25x52x15 mm
SKF 6205 2Z/C3 single-row deep-groove ball bearing with metal shields on both sides.
C3 denotes greater-than-normal radial internal clearance; for radial and limited axial loads in either direction.
10x26x8 mm
SKF 6000 2Z single-row deep-groove ball bearing with non-contact metal shields on both sides. A low-friction shielded design for radial and limited axial loads in both directions.
6x19x6 mm
Compact EU-ROLL 626 2RS single-row deep groove ball bearing with contact rubber seals on both sides, helping protect the lubricant and bearing interior from contaminants.
15x32x9 mm
Single-row SKF 6002-2RSH deep groove ball bearing in SKF Explorer performance class. NBR contact seals on both sides help retain the grease and protect the bearing against contamination.
35x72x17 mm
Single-row open ZKL 6207 deep groove ball bearing for radial loads and axial loads in both directions. The open design allows the lubrication method to be selected for the specific bearing arrangement.
30x47x9 mm
Thin-section, single-row NTN 6906 2RS deep groove ball bearing with contact rubber seals on both sides, CN clearance and a pressed-steel cage. The compact design is intended for sealed arrangements with limited radial space.
17x40x12 mm
ZKL 1203 double-row self-aligning ball bearing with a cylindrical bore and open design.
Accommodates shaft-to-housing misalignment; for radial and light axial loads in either direction.
8x22x7 mm
INA 608 2Z C3 single-row deep-groove ball bearing with non-contact metal shields on both sides. A low-friction shielded design for radial and limited axial loads in both directions. The C3 suffix denotes greater-than-normal radial internal clearance.
30x47x9 mm
61906 2RS ZVL deep-groove ball bearing with rubber seals on both sides.
10x26x8 mm
NTN single-row deep groove ball bearing with non-contact steel shields on both sides, P6 accuracy, C3 radial clearance and electric-motor quality.
30x60.03x37 mm
SKF double-row angular contact ball bearing with contact seals on both sides; VKBC 20081 / BA2B 246033.
45x75x16 mm
FAG single-row deep groove ball bearing with metal shields on both sides (2Z).
17x40x12 mm
Metal shield on one side. ZKL single-row deep groove ball bearing for versatile rotating assemblies.
15x32x9 mm
6002 Z ZKL deep-groove ball bearing with a metal shield on one side.
30x55x13 mm
ZVL 6006 single-row open deep groove ball bearing for radial and axial loads in both directions. Dynamic load rating 13.24 kN, mass 0.111 kg.
35x80x32.75 mm
CRB 32307 single-row tapered roller bearing for high combined radial and axial loads. The separable inner-ring cone with rollers and outer-ring cup allow precise mounting and clearance or preload adjustment.
35x42x20 mm
MTM HK 3520 drawn-cup needle roller bearing with open ends and no inner ring. A compact design for high radial loads where radial installation space is limited.
Product rating
Be the first who will post an article to this item!
We can arrange delivery of almost any CRF product, even if it is not currently listed in our catalogue.
Send us the designation, a photo of the nameplate, dimensions or a description of the application, and we will check availability.
CRF – product identification and supply
The CRF designation may appear on different technical products and spare parts. To identify the exact item reliably, we therefore work from the complete marking and the available technical data.
The exact item should be selected by its complete designation and technical parameters. Dimensions, design, material and operating conditions are important when matching a replacement.
For an accurate quotation, please provide the full marking, required quantity and any available documentation. We will compare the specification and verify a suitable delivery option.