Bearing - 1726210 2RS1 SKF

Bearing - 6211 2RS C3 SKF

55 × 100 × 21 mm. Single-row deep-groove ball bearing. Rubber seals on both sides; C3 means greater radial internal clearance, so verify suitability.

Bearing - 6209 2Z C3 SKF

45 × 85 × 19 mm. SKF bearing for industrial applications. When replacing a part, always verify the complete designation, dimensions, design and application requirements against the manufacturer documentation.

Bearing - 31309 A FLT

45 × 100 × 27.25 mm. single-row tapered roller bearing carries high radial load together with axial load in one direction. Its separable inner assembly with rollers and separate outer ring simplify mounting.

Bearing - 6301 2RS ZVL

12 × 37 × 12 mm. deep-groove ball bearing with rubber seals on both sides.

Needle roller bearing - HK 5020 INA

50 × 58 × 20 mm. needle roller bearing for replacement use. Dimensions d × D × B: 50 × 58 × 20 mm. Before ordering, compare the complete designation, dimensions and design with the original part.

Bearing - 30230 A URB

150 × 270 × 49 mm. Technické provedení a kompatibilitu ověřte podle úplného označení výrobce a požadavků aplikace.

Bearing - 6003 2Z SKF

17 × 35 × 10 mm. Single-row deep groove ball bearing, shielded on both sides (2Z).

Bearing - 6005 2RS C3 SKF

25 × 47 × 12 mm. single-row deep groove ball bearing with contact rubber seals on both sides. A compact solution for radial and moderate axial loads in both directions, protected against dust, contamination and lubricant loss. C3 provides greater radial internal clearance than the normal class.

Bearing - 21313 E SKF

65 × 140 × 33 mm. SKF bearing with designation 21313 E. Before ordering, compare the full designation and execution with the original part used in your equipment.

Bearing - NJ 2207 ZVL

35 × 72 × 23 mm. single-row cylindrical roller bearing with high radial load capacity. The NJ design locates the shaft axially in one direction and allows relative axial displacement of the rings in the opposite direction.

Bearing - SS 3302 2RS INOX LDI

15 × 42 × 19 mm. Rubber seals on both sides.