Bearing - 30210 A P6X ZVL

Self-aligning ball bearing 2306 E 2RS1TN9 SKF has two rows of balls and a common spherical raceway in the outer ring. This design accommodates static and dynamic misalignment between the shaft and housing.

Seals on both sides help protect the bearing interior from contaminants. It is suitable for arrangements where shaft deflection or mounting misalignment can occur.

NU 2205 URB single-row cylindrical roller bearing is a separable bearing for high radial loads. The NU design has two integral flanges on the outer ring and a flangeless inner ring, allowing axial displacement of the shaft relative to the housing in both directions.

6022 2Z C3 FAG deep-groove ball bearing is a single-row bearing with steel shields on both sides and C3 radial internal clearance. It carries radial loads and moderate axial loads in both directions and is suitable for higher-speed operation.

SS 61800 2Z neu stainless deep-groove ball bearing is a thin-section single-row bearing with non-contact metal shields on both sides. It combines low friction and protection of the factory lubricant against common dust, while the stainless design offers better corrosion resistance than conventional bearing steel.

SS 6203 2RS neu stainless-steel deep-groove ball bearing is a single-row bearing with rubber seals on both sides. The stainless execution improves resistance to moisture and corrosion, while the seals protect the factory grease and bearing interior.

25x42x20 mm

The GE 25 E 2RS ZVL radial spherical plain bearing has spherical sliding surfaces and rubber seals on both sides. It accommodates oscillating movement and misalignment while supporting high radial and combined loads.

Suitable for hydraulic cylinders, linkages, articulated mechanisms, agricultural and construction machinery. Its steel sliding surfaces require appropriate lubrication.

Deep groove ball bearing 6012 SKF is a single-row bearing in an open design. It accommodates radial loads and moderate axial loads in both directions and is suitable for accurate shaft support.

The open construction has no integral shields or seals, allowing direct lubricant access but requiring a clean or externally protected environment and a correctly designed lubrication system.

25x52x15 mm

High-precision spindle ball bearing S 6205 C 18 TA UP GMN for precision arrangements carrying combined radial load and axial load in one direction. The complete C 18 TA UP design, pairing and required preload must be preserved when replacing it.

6000 2RS1 SKF deep-groove ball bearing is a single-row bearing with rubber seals on both sides. It carries radial loads and moderate axial loads in both directions while protecting the factory grease against leakage and common contaminants.

55x63x25 mm

The HK 5525 ZEN drawn-cup needle roller bearing is a thin-walled, open-ended bearing without an inner ring. It provides high radial load capacity where radial installation space is very limited.

The shaft acts directly as the inner raceway and therefore requires suitable hardness, accuracy and surface finish. This bearing does not provide axial location.

30216 A ZKL tapered roller bearing is a separable single-row bearing for high radial loads combined with axial load in one direction. The A design offers increased load capacity and a higher limiting speed; clearance or preload is established during installation.