ZVL
We can arrange delivery of almost any ZVL product, even if it is not currently listed in our catalogue.
Send us the designation, a photo of the nameplate, dimensions or a description of the application, and we will check availability.
ZVL – product identification and supply
The ZVL designation may appear on different technical products and spare parts. To identify the exact item reliably, we therefore work from the complete marking and the available technical data.
The exact item should be selected by its complete designation and technical parameters. Dimensions, design, material and operating conditions are important when matching a replacement.
For an accurate quotation, please provide the full marking, required quantity and any available documentation. We will compare the specification and verify a suitable delivery option.
Product sorting
List of products
Bearing - 6001 2RS ZVL
12 × 28 × 8 mm. Single-row deep-groove ball bearing with contact rubber seals on both sides (2RS). Check the complete designation and application suitability.
Bearing - 6000 2RS ZVL
10 × 26 × 8 mm. single-row deep groove ball bearing with contact rubber seals on both sides. A compact solution for radial and moderate axial loads in both directions, protected against dust, contamination and lubricant loss.
Bearing - 6004 2RS ZVL
20 × 42 × 12 mm. Single-row deep-groove ball bearing with rubber seals on both sides. Check the complete designation and suitability for the specific application.
Bearing - 6204 2RS ZVL
20 × 47 × 14 mm. single-row deep groove ball bearing with contact rubber seals on both sides. A compact solution for radial and moderate axial loads in both directions, protected against dust, contamination and lubricant loss.
Bearing - 6006 2RSR ZVL
30 × 55 × 13 mm. Single-row deep-groove ball bearing. Rubber seals on both sides; compare the complete designation before ordering.
Bearing - 51107 ZVL
35 × 52 × 12 mm. thrust ball bearing is designed to carry axial load in one direction. It is used where force acting along the shaft axis must be reliably supported.
Bearing - 6303 2RS ZVL
17 × 47 × 14 mm. single-row deep groove ball bearing with contact rubber seals on both sides. A compact solution for radial and moderate axial loads in both directions, protected against dust, contamination and lubricant loss.
Bearing - 6205 2RS ZVL
25 × 52 × 15 mm. single-row deep groove ball bearing with contact rubber seals on both sides. A compact solution for radial and moderate axial loads in both directions, protected against dust, contamination and lubricant loss.
Bearing - 6007 2Z ZVL
35 × 62 × 14 mm. single-row deep groove ball bearing with non-contact metal shields on both sides. Suitable for radial and moderate axial loads in both directions, combining low friction with protection of the lubricant from larger contaminants.
Bearing - 30206 A KLF
30 × 62 × 17.25 mm. single-row tapered roller bearing for high radial loads combined with axial load in one direction. The separable design allows the inner ring assembly and outer ring to be mounted independently.
Bearing - 6304 2RS ZVL
20 × 52 × 15 mm. Single-row deep-groove ball bearing. Rubber seals on both sides; compare the complete designation before ordering.
Bearing - 61904 2RS ZVL
20 × 37 × 9 mm. single-row deep groove ball bearing with contact rubber seals on both sides. A compact solution for radial and moderate axial loads in both directions, protected against dust, contamination and lubricant loss.
Bearing - 2306 ZVL
30 × 72 × 27 mm. Double-row self-aligning ball bearing. For arrangements with possible angular misalignment; compare the complete designation before ordering.
Bearing - 6206 2RSR ZVL
30 × 62 × 16 mm. Single-row deep-groove ball bearing. Rubber seals on both sides; compare the complete designation before ordering.
Bearing - NJ 2207 ZVL
35 × 72 × 23 mm. single-row cylindrical roller bearing with high radial load capacity. The NJ design locates the shaft axially in one direction and allows relative axial displacement of the rings in the opposite direction.
Bearing - 6206 2RS ZVL
30 × 62 × 16 mm. single-row deep groove ball bearing with contact rubber seals on both sides. It carries radial and moderate axial loads in both directions while protecting the rolling elements from dust, contamination and lubricant loss.
Bearing - GE 50 E 2RS ZVL
50 × 75 × 35 mm. radial spherical plain bearing for oscillating motion, slow tilting and accommodation of angular misalignment. Seals on both sides help protect the sliding surfaces and retain lubricant.
Bearing - 61804 2RS ZVL
20 × 32 × 7 mm. single-row deep groove ball bearing with contact rubber seals on both sides. A compact solution for radial and moderate axial loads in both directions, protected against dust, contamination and lubricant loss.