Bearing - 30312 A FLT

Bearing - ZARN60120-TV-A INA

is a combined INA bearing designed for applications requiring reliable radial and axial load capacity. Bore d: 60 mm. Outside diameter D: 105 mm. Width B: 82 mm. Flange diameter D1: 120 mm. Polyamide cage, without seal. Load ratings: dynamic radial 44,500 N, static radial 92,000 N; dynamic axial 187,000 N, static axial 550,000 N Speed: 950 rpm with grease, 2,700 rpm with oil. Do not confuse the bearing….

Bearing - 1040-1.1/2DECG RHP

Bearing.

Needle roller bearing - HK 1612 INA

16 × 22 × 12 mm. INA needle roller bearing HK 1612 for replacement use. Before ordering, compare the complete designation and verify dimensions, design and fit with the original part. Confirm compatibility using manufacturer documentation and the requirements of the specific application.

Spherical plain bearing - GAKFL 16 PB ELGES

16 × 32 × 21 mm. ELGES needle roller bearing GAKFL 16 PB for replacement use. Before ordering, compare the complete designation and verify dimensions, design and fit with the original part. Confirm compatibility using manufacturer documentation and the requirements of the specific application.

Bearing - 6203 2RS KINEX

17 × 40 × 12 mm. single-row deep groove ball bearing with contact rubber seals on both sides. A compact solution for radial and moderate axial loads in both directions, protected against dust, contamination and lubricant loss.

Needle roller bearing - HK 3520 MTM

35 × 42 × 20 mm. MTM needle roller bearing HK 3520 for replacement use. Before ordering, compare the complete designation and verify dimensions, design and fit with the original part. Confirm compatibility using manufacturer documentation and the requirements of the specific application.

Bearing - 1726208-2RS1 SKF

Bearing.

Needle roller bearing - HK 3520 IBB

35 × 42 × 20 mm. IBB needle roller bearing HK 3520 for replacement use. Before ordering, compare the complete designation and verify dimensions, design and fit with the original part. Confirm compatibility using manufacturer documentation and the requirements of the specific application.

Bearing - 1309 EKTN9 C3 SKF

45 × 100 × 25 mm. ball bearing for replacement use. Before ordering, compare the complete designation and verify the dimensions, design and fit with the original part. Confirm compatibility against SKF documentation and the requirements of the specific application.

Bearing - 6203 2RS CW

17 × 40 × 12 mm. single-row deep-groove ball bearing with contact rubber seals on both sides. The closed design helps retain lubricant and protects the raceways from contamination and moisture.

Bearing - NU 2207 ZKL

35 × 72 × 23 mm. single-row cylindrical roller bearing for high radial loads. The NU design has two integral flanges on the outer ring and permits axial displacement of the shaft relative to the housing in both directions, making it suitable for a non-locating bearing position.

Bearing - 6209 2RS FLT

Bearing.