Bearing - 32014 AX KLF ZVL
Product detailed description
Bearing - 32014 AX KLF ZVL
32014 AX KLF ZVL tapered roller bearing
This single-row tapered roller bearing measures 70 × 110 × 25 mm and is designed for arrangements exposed to radial and axial forces at the same time. The tapered raceways and rollers provide high load capacity and rigid shaft support.
Principal dimensions
| Bore diameter d | 70 mm |
|---|---|
| Outside diameter D | 110 mm |
| Overall width T | 25 mm |
Design and applications
- supports radial loads together with axial loads in one direction,
- normally paired with an opposed bearing when axial forces act in both directions,
- the cone assembly with rollers and cage can be separated from the outer ring,
- suitable for gearboxes, hubs, industrial machinery and other precise rotating arrangements.
Installation guidance
Install in a clean environment and use the lubricant specified for the application. Apply mounting force only to the ring with the interference fit. Set the required clearance or preload after assembly.
Important: AX may identify a manufacturer-specific design. When replacing the bearing, compare the complete designation 32014 AX KLF ZVL and the original component; do not assume that a standard 32014 or another suffix is interchangeable.
Product rating
Be the first who will post an article to this item!
We can arrange delivery of almost any KLF-ZVL product, even if it is not currently listed in our catalogue.
Send us the designation, a photo of the nameplate, dimensions or a description of the application, and we will check availability.
KLF-ZVL – product identification and supply
The KLF-ZVL designation may appear on different technical products and spare parts. To identify the exact item reliably, we therefore work from the complete marking and the available technical data.
The exact item should be selected by its complete designation and technical parameters. Dimensions, design, material and operating conditions are important when matching a replacement.
For an accurate quotation, please provide the full marking, required quantity and any available documentation. We will compare the specification and verify a suitable delivery option.