Bearing - 32304 SKF

40x90x23 mm
Metal shields on both sides
Greater radial internal clearance

Single-row deep-groove ball bearing 6308 2Z C3 SKF for radial load and axial loads in both directions. Two non-contact metal shields retain lubricant with low friction; C3 clearance provides allowance for tight fits or elevated operating temperature.

30x47x11 mm

Single-direction thrust ball bearing 51106 N ZKL with a separable design for reliable transmission of axial load in one direction. The compact 511 series is suitable where axial installation space is limited.

35x72x42.9 mm

UC 207 DPI insert ball bearing with an extended inner ring is secured to the shaft by two grub screws. Its spherical outer surface is designed for installation in a matching bearing housing.

95x170x45.5 mm

Single-row tapered roller bearing 32219 E ZKL for high radial loads and axial load in one direction. The separable design simplifies mounting; the E suffix is part of the exact designation and must match the equipment documentation when replacing the bearing.

Four-point contact ball bearing Q 305 P63 DKF is a single-row angular contact bearing for axial loads in both directions. It provides bidirectional axial shaft location within a compact cross-section.

The P63 suffix combines P6 accuracy and C3 axial internal clearance. This version must match the application requirements and is not an automatic substitute for Normal accuracy or clearance.

35x80x21 mm

6307 Z ZKL deep groove ball bearing has a non-contact metal shield on one side. The shield limits the ingress of larger contaminants and lubricant loss while retaining low friction; the opposite side remains open.

50x110x27 mm

1310 ZKL double-row self-aligning ball bearing with a cylindrical bore can accommodate slight misalignment between the shaft and housing. The open design is suitable for radial loads and limited axial loads in both directions.

45x85x23 mm

Double-row self-aligning ball bearing 2209 E2RS1TN9 SKF with contact seals on both sides and a polyamide cage. It accommodates slight misalignment and shaft deflection and carries radial loads together with light axial loads in both directions.

20x32x7 mm

61804 2RS1 SKF deep groove ball bearing has contact rubber seals on both sides, helping retain lubricant and protect the raceways against contamination and moisture.

30x72x27 mm

Double-row angular contact ball bearing 3306 CX for combined radial and axial loads in both directions. This stocked item is specified with a width of 27 mm; compare it carefully with the original bearing before replacement.

30x55x13 mm

Single-row deep groove ball bearing 6006 2Z FAG with non-contact metal shields on both sides. Low-friction design for radial and axial loads in both directions; compare the complete 2Z marking before replacement.

25x62x17 mm

1305 HARP double-row self-aligning ball bearing with a cylindrical bore can accommodate slight misalignment between the shaft and housing. The open design is suitable for radial loads and limited axial loads in both directions.