Bearing - 51105 ZKL

2302 2RS CODEX self-aligning ball bearing has two rows of balls and a spherical raceway in the outer ring, allowing it to compensate for angular misalignment between the shaft and housing. Rubber seals on both sides protect the factory grease and the bearing interior against common contaminants.

16x52x43.2 mm

FRR 52-1 AS NADELLA guide roller is a stud-type roller for linear guides and cam tracks. Its 52 mm outside diameter provides a durable rolling surface, while the eccentric stud allows precise positional adjustment relative to the track. Retain the complete -1 AS designation when replacing it and compare it with the original part.

The UC 205 CRAFT insert bearing is a sealed ball-bearing insert with a spherical outside surface and an extended inner ring. It is secured to the shaft by two grub screws and is designed for installation in a matching bearing housing.

Suitable for conveyors, fans, agricultural machinery and simple industrial drives. This product is the UC insert only; a complete housing is not included.

SS 6203 2RS neu stainless-steel deep-groove ball bearing is a single-row bearing with rubber seals on both sides. The stainless execution improves resistance to moisture and corrosion, while the seals protect the factory grease and bearing interior.

12x22x10 mm

The GE 12 E BBC radial spherical plain bearing is a compact sliding bearing with spherical sliding surfaces. It accommodates tilting, slow oscillating movement and misalignment under radial and combined loads.

This open, unsealed design is suitable for linkages, small hydraulic mechanisms and machine joints with regular lubrication and external contamination protection.

1205 KINEX self-aligning ball bearing has two rows of balls, a cylindrical bore and a common spherical raceway in the outer ring. It accommodates angular misalignment between shaft and housing and operates with low friction, including at higher speeds.

6008 2RS ZVL deep-groove ball bearing is a single-row bearing with rubber seals on both sides. It carries radial loads and moderate axial loads in both directions while protecting the factory grease against leakage and common contaminants.

6305 2ZC3 SKF deep-groove ball bearing is a single-row bearing with steel shields on both sides and C3 radial internal clearance. It carries radial loads and moderate axial loads in both directions and is suitable for higher-speed operation.

6x19x6 mm

626 2RSR ZWICKER miniature ball bearing is a single-row radial bearing for a 6 mm shaft with rubber seals on both sides. It carries radial load and lighter axial forces in either direction. The 2RSR design protects the lubricant and rolling contact in small drives and precision mechanisms.

6208 2Z C3 SKF deep-groove ball bearing is a single-row bearing with steel shields on both sides and C3 radial internal clearance. It carries radial loads and moderate axial loads in both directions and is suitable for higher-speed operation.

6016 2ZRC3 ZVL deep-groove ball bearing is a thin-section single-row bearing with non-contact metal shields on both sides (2ZR) and greater-than-normal C3 radial clearance. It combines low friction, high-speed capability and protection of the factory lubricant against common dust.