Bearing - 6000 2RSH C3 SKF

6310 2RS C3 ZKL deep-groove ball bearing is a single-row bearing with rubber seals on both sides and greater-than-normal C3 radial internal clearance. It carries radial loads and moderate axial loads in both directions while protecting the factory grease against leakage and common contaminants.

100x215x73 mm

Spherical roller bearing 22320 KM ZKL with a tapered bore and machined brass cage for high radial loads and axial loads in both directions. Its self-aligning design helps accommodate misalignment and shaft deflection.

6213 C3 ZVL deep-groove ball bearing is an open single-row bearing with greater-than-normal C3 radial internal clearance. It carries radial loads and moderate axial loads in both directions and suits arrangements where interference fits or operating temperatures reduce internal clearance.

60x150x35 mm

Single-row deep-groove ball bearing 6412 N ZKL for radial and axial loads in both directions. The N design has a snap-ring groove in the outer ring; when replacing, retain the complete designation and verify the axial locating method.

Self-aligning ball bearing 2306 E 2RS1TN9 SKF has two rows of balls and a common spherical raceway in the outer ring. This design accommodates static and dynamic misalignment between the shaft and housing.

Seals on both sides help protect the bearing interior from contaminants. It is suitable for arrangements where shaft deflection or mounting misalignment can occur.

63/22 2RS KOYO deep-groove ball bearing is a single-row bearing with contact rubber seals on both sides. It carries radial loads and moderate axial loads in both directions, while the factory grease is protected against leakage and common contaminants.

12x22x10 mm

The GE 12 E BBC radial spherical plain bearing is a compact sliding bearing with spherical sliding surfaces. It accommodates tilting, slow oscillating movement and misalignment under radial and combined loads.

This open, unsealed design is suitable for linkages, small hydraulic mechanisms and machine joints with regular lubrication and external contamination protection.

15x28x9 mm

Single-direction thrust ball bearing 51102 URB for carrying axial load in one direction. Its separable design simplifies installation of the individual washers and ball-and-cage assembly; when replacing, compare the complete designation, dimensions and load direction.

6014 2RSR FAG deep-groove ball bearing is a single-row bearing with RSR contact seals on both sides. It carries radial loads and moderate axial loads in both directions while protecting the factory grease against leakage, dust and moisture.

6022 2Z C3 FAG deep-groove ball bearing is a single-row bearing with steel shields on both sides and C3 radial internal clearance. It carries radial loads and moderate axial loads in both directions and is suitable for higher-speed operation.