Bearing - 6001 URB
Product detailed description
Bearing - 6001 URB
URB 6001 bearing is a single-row open deep groove ball bearing with dimensions of 12 × 28 × 8 mm. Its versatile design supports radial loads as well as axial loads in both directions. The open version has no shields or seals and is intended for arrangements where lubrication and protection are provided by the surrounding assembly.
Technical data
| Designation | 6001 |
|---|---|
| Manufacturer | URB |
| Type | single-row deep groove ball bearing, open |
| Bore diameter d | 12 mm |
| Outside diameter D | 28 mm |
| Width B | 8 mm |
| Minimum chamfer rs | 0.3 mm |
| Mass | 0.022 kg |
| Basic dynamic load rating Cr | 5.1 kN |
| Basic static load rating C0r | 2.4 kN |
| Limiting speed – grease / oil | 26,000 / 32,000 min−1 |
Design and use
- the open construction gives lubricant direct access to the rolling elements,
- deep raceways support radial and axial loads in both directions,
- protection from contaminants and the relubrication method must be provided by the specific arrangement.
Check before ordering
Compare the 6001 designation, dimensions and open design with the original bearing or technical documentation. The speeds shown are catalogue limiting values; the actual operating limit depends on load, lubrication, temperature and mounting accuracy. If you need help confirming a replacement, send us the full designation or a photo of the original part.
Product rating
Be the first who will post an article to this item!
We can arrange delivery of almost any URB product, even if it is not currently listed in our catalogue.
Send us the designation, a photo of the nameplate, dimensions or a description of the application, and we will check availability.
URB – product identification and supply
The URB designation may appear on different technical products and spare parts. To identify the exact item reliably, we therefore work from the complete marking and the available technical data.
The exact item should be selected by its complete designation and technical parameters. Dimensions, design, material and operating conditions are important when matching a replacement.
For an accurate quotation, please provide the full marking, required quantity and any available documentation. We will compare the specification and verify a suitable delivery option.
| Manufacturing company : | RULMENTI S.A. Barlad |
|---|---|
| Address : | Republicii Street no. 320, 731108 Barlad, Romania |
| E-mail : | info@urb.ro |