Bearing - 607 ZZ DPI

Bearing - 21318 E SKF

90 × 190 × 43 mm. SKF bearing for industrial applications. When replacing a part, always verify the complete designation, dimensions, design and application requirements against the manufacturer documentation.

Bearing - 20312 TVPC3 FAG

FAG bearing for industrial applications. When replacing a part, always verify the complete designation, dimensions, design and application requirements against the manufacturer documentation.

Bearing - NNU4926-S-M-SP FAG

Bearing - is a double-row precision cylindrical roller bearing with a solid brass M cage, normal. Cn clearance and SP precision. The W33 design has a lubrication groove and three holes in the outer ring. Dimensions: inner diameter d 130 mm, outer diameter D 180 mm, width B 50 mm; weight 3.83 kg. Guided rollers provide high radial stiffness, load capacity and running accuracy.….

Bearing - 31309 A FLT

45 × 100 × 27.25 mm. single-row tapered roller bearing carries high radial load together with axial load in one direction. Its separable inner assembly with rollers and separate outer ring simplify mounting.

Bearing - 6204 2RS BBC

20 × 47 × 14 mm. single-row deep groove ball bearing with contact rubber seals on both sides. A compact solution for radial and moderate axial loads in both directions, protected against dust, contamination and lubricant loss.

Bearing - 6202 2ZR ZKL

15 × 35 × 11 mm. single-row deep groove ball bearing with non-contact metal shields on both sides. Suitable for radial and moderate axial loads in both directions, combining low friction with protection of the lubricant from larger contaminants.

Bearing - 6001 2RS SKF

12 × 28 × 8 mm. single-row deep groove ball bearing with contact rubber seals on both sides. A compact solution for radial and moderate axial loads in both directions, protected against dust, contamination and lubricant loss.

Bearing - 6003 2Z SKF

17 × 35 × 10 mm. Single-row deep groove ball bearing, shielded on both sides (2Z).

Bearing - 22212 E C4 SKF

60 × 110 × 28 mm. Bearing for industrial rotating assemblies. Before selecting, verify the full designation, dimensions, and requirements of the specific application.

Bearing - 6005 2RS SKF

25 × 47 × 12 mm. deep-groove ball bearing is a single-row radial bearing with rubber seals on both sides. It carries radial loads and moderate axial forces in either direction. The 2RS design helps protect the internal rolling contact from dust and moisture while retaining lubricant inside the bearing.

Bearing - NU1032ML SKF

single-row cylindrical roller bearing with NU design 160 × 240 × 38 mm ML brass cage, ring-centered. Cn normal internal clearance.

Bearing - NJ 2207 ZVL

35 × 72 × 23 mm. single-row cylindrical roller bearing with high radial load capacity. The NJ design locates the shaft axially in one direction and allows relative axial displacement of the rings in the opposite direction.