Bearing - 608 2Z C3 INA
Product detailed description
Bearing - 608 2Z C3 INA
608 2Z C3 INA deep-groove ball bearing – 8 × 22 × 7 mm
608 2Z C3 INAis a single-row deep-groove ball bearing with a metal shield on each side. The non-contact shields help retain lubricant inside the bearing and protect the rolling elements against common solid contaminants while maintaining low friction.
TheC3suffix denotes greater-than-normal radial internal clearance. It can allow for clearance reduction caused by an interference fit or operating temperature; suitability must always be assessed for the specific arrangement.
- Dimensions d × D × B:8 × 22 × 7 mm
- Design:2Z – metal shields on both sides
- Type:single-row deep-groove ball bearing
- Manufacturer:INA
- Radial internal clearance:C3 – greater than normal
- Loads:radial and limited axial load in both directions
Applications
The compact 608 series is used in electric motors, fans, small drives, instruments and other rotating mechanisms. The shielded design suits applications requiring smooth running and basic protection of the bearing interior.
Mounting and compatibility checks
Before ordering, compare the complete608 2Z C3designation, dimensions and shield type with the original part. Metal shields are not rubber seals and do not provide complete protection against water or very fine contamination. During mounting, apply force only through the ring with the interference fit and avoid mechanical damage to the shields.
Product rating
Be the first who will post an article to this item!
We can arrange delivery of almost any INA product, even if it is not currently listed in our catalogue.
Send us the designation, a photo of the nameplate, dimensions or a description of the application, and we will check availability.
INA – product identification and supply
The INA designation may appear on different technical products and spare parts. To identify the exact item reliably, we therefore work from the complete marking and the available technical data.
The exact item should be selected by its complete designation and technical parameters. Dimensions, design, material and operating conditions are important when matching a replacement.
For an accurate quotation, please provide the full marking, required quantity and any available documentation. We will compare the specification and verify a suitable delivery option.
| Manufacturing company : | Schaeffler Technologies AG & Co. KG |
|---|---|
| Address : | Industriestraße 1–3, 91074 Herzogenaurach, Germany |
| E-mail : | info@schaeffler.com |