Bearing - 61805 2RS CX

Bearing - 2205 2RSTNG NSK

25 × 52 × 18 mm. NSK bearing for industrial applications. When replacing a part, always verify the complete designation, dimensions, design and application requirements against the manufacturer documentation.

Bearing - ZARN60120-TV-A INA

is a combined INA bearing designed for applications requiring reliable radial and axial load capacity. Bore d: 60 mm. Outside diameter D: 105 mm. Width B: 82 mm. Flange diameter D1: 120 mm. Polyamide cage, without seal. Load ratings: dynamic radial 44,500 N, static radial 92,000 N; dynamic axial 187,000 N, static axial 550,000 N Speed: 950 rpm with grease, 2,700 rpm with oil. Do not confuse the bearing….

Bearing - 6202 2Z FAG

15 × 35 × 11 mm. ball bearing for replacement use. Before ordering, compare the complete designation and verify the dimensions, design and fit with the original part. Confirm compatibility against FAG documentation and the requirements of the specific application. Metal shields on both sides.

Bearing - SM 6012 C TXM UP GMN

Bearing.

Bearing - 6212 2RSR C3 FAG

60 × 110 × 22 mm. Rubber seals on both sides. Greater radial internal clearance.

Bearing - 6002 2Z C3 ZKL

15 × 32 × 9 mm. bearing for replacement use. Before ordering, compare the complete designation and verify the dimensions, design and fit with the original part. Confirm compatibility against ZKL documentation and the requirements of the specific application.

Bearing - 624 2Z SKF

4 × 13 × 5 mm. Metal shields on both sides.

Bearing - 6203 2RS KINEX

17 × 40 × 12 mm. single-row deep groove ball bearing with contact rubber seals on both sides. A compact solution for radial and moderate axial loads in both directions, protected against dust, contamination and lubricant loss.

Bearing - B7213-E-T-P4S-UL FAG

Bearing.

Bearing - 6005 2RS SKF

25 × 47 × 12 mm. deep-groove ball bearing is a single-row radial bearing with rubber seals on both sides. It carries radial loads and moderate axial forces in either direction. The 2RS design helps protect the internal rolling contact from dust and moisture while retaining lubricant inside the bearing.

Linear ball bearing - KSO20-PP INA

is an open self-aligning linear ball bearing designed for precise and smooth linear motion on a supported guide shaft with a diameter of 20 mm. The PP version is fitted with lip seals on both sides to help protect the internal components against contamination and retain lubricant. INA bearing for industrial applications. When replacing a part, always verify the complete designation, dimensions, design….

Bearing - 6003 RS ZKL

17 × 35 × 10 mm. Single-row ZKL 6003-RS deep groove ball bearing with a rubber seal on one side. The sealed side helps protect the lubricant, while the opposite side remains open for the lubrication method defined by the bearing arrangement.