Bearing - 61903 2RS1 SKF

25x52x15 mm

The 6205 2Z NSK deep-groove ball bearing is a single-row radial bearing with non-contact metal shields on both sides. The shields help retain lubricant and limit the ingress of common contaminants while maintaining low running friction.

Suitable for electric motors, fans, pumps, gearboxes, conveyors and other rotating equipment. The 2Z suffix denotes two metal shields; this is not a watertight design.

100x215x73 mm

The 22320 E SKF spherical roller bearing is a double-row self-aligning bearing for very high radial loads and simultaneous axial loads in both directions. Its spherical outer-ring raceway helps accommodate misalignment between the shaft and housing.

This robust open bearing has a cylindrical bore and is intended for demanding industrial applications with suitable lubrication.

S 6001 2RS neu deep-groove ball bearing is a single-row bearing with contact rubber seals on both sides. It carries radial loads and moderate axial loads in both directions, while the factory grease is protected against leakage and common contaminants.

31305 A KINEX tapered roller bearing is a separable single-row bearing for high radial loads combined with axial load in one direction. Two bearings in an opposed arrangement are normally used when axial location is required in both directions.

60x110x22 mm

6212 2RSR KINEX deep-groove ball bearing is a single-row radial bearing with rubber seals on both sides. It carries radial loads and moderate axial forces in either direction. The 2RSR design helps protect the internal rolling contact from dust and moisture while retaining lubricant inside the bearing.

1210 K ZKL self-aligning ball bearing has two rows of balls, a spherical outer-ring raceway and a tapered bore. It accommodates angular misalignment between shaft and housing and can be mounted directly on a tapered journal or with a matching adapter sleeve.

25x42x20 mm

The GE 25 E 2RS ZVL radial spherical plain bearing has spherical sliding surfaces and rubber seals on both sides. It accommodates oscillating movement and misalignment while supporting high radial and combined loads.

Suitable for hydraulic cylinders, linkages, articulated mechanisms, agricultural and construction machinery. Its steel sliding surfaces require appropriate lubrication.

2302 2RS CODEX self-aligning ball bearing has two rows of balls and a spherical raceway in the outer ring, allowing it to compensate for angular misalignment between the shaft and housing. Rubber seals on both sides protect the factory grease and the bearing interior against common contaminants.

NN 3022 KP 52 ZKL double-row cylindrical roller bearing is a precision radial bearing with a tapered bore, P5 accuracy and reduced C2 internal clearance. Its high radial load capacity and rigidity make it particularly suitable for precision spindles and other demanding machine arrangements.

25x62x17 mm

6305 F-HTO SKWC GERMANY deep-groove ball bearing is a single-row bearing in dimension series 63 for a 25 mm shaft. It carries radial loads and moderate axial loads in both directions and suits accurately aligned, smooth-running rotating assemblies. F-HTO is a manufacturer-specific variant code; verify its exact meaning and operating parameters against the original bearing or technical documentation before substitution.