Bearing - 6201 C3 KINEX
Bearing - 6209 2RS FLT
Bearing.
Bearing - YAT 205 SKF
25 × 52 × 27.2 mm. insert ball bearing with a narrow inner ring extended on one side and locking by two set screws. Standard contact seals on both sides protect the grease and bearing interior.
Bearing - K 85x92x20 NEU
Bearing.
Spherical plain bearing - GAL 35 UK 2RS ELGES
with rubber seals on both sides spherical plain bearing for replacement use. Before ordering, compare the complete designation and verify the dimensions, design and fit with the original part. Confirm compatibility against ELGES documentation and the requirements of the specific application.
Spherical plain bearing - GAKFL 6 PB ELGES
6 × 16 × 9 mm. spherical plain bearing for replacement use. Before ordering, compare the complete designation and verify the dimensions, design and fit with the original part. Confirm compatibility against ELGES documentation and the requirements of the specific application.
Bearing - 624 P5 TPX ZKL
4 × 13 × 5 mm. bearing with increased P5 precision. Catalogue brand: TPX; compare the complete designation and physical marking before replacement.
Needle roller bearing - HK 3520 MTM
35 × 42 × 20 mm. MTM needle roller bearing HK 3520 for replacement use. Before ordering, compare the complete designation and verify dimensions, design and fit with the original part. Confirm compatibility using manufacturer documentation and the requirements of the specific application.
Bearing - 1308 ZKL
40 × 90 × 23 mm. ball bearing for replacement use. Before ordering, compare the complete designation and verify the dimensions, design and fit with the original part. Confirm compatibility against ZKL documentation and the requirements of the specific application.
Bearing - 6002 2RSH SKF
15 × 32 × 9 mm. Single-row SKF 6002-2RSH deep groove ball bearing in SKF Explorer performance class. NBR contact seals on both sides help retain the grease and protect the bearing against contamination.
Bearing - F 6003 2RS neu
17 × 35 × 10 mm. neu F 6003 2RS bearing for replacement use. Before ordering, compare the complete designation and verify the dimensions, design and fit with the original part. Confirm compatibility against neu documentation and the requirements of the specific application.
Bearing - PLC 23 5 ZKL
30 × 49.25 × 13.6 mm. ZKL PLC 23-5 special clutch ball bearing with a pressed-steel housing and steel cage. Intended for the later clutch design used on. Škoda 105–130 vehicles; always confirm compatibility by designation and dimensions.
Bearing - 1309 EKTN9 C3 SKF
45 × 100 × 25 mm. ball bearing for replacement use. Before ordering, compare the complete designation and verify the dimensions, design and fit with the original part. Confirm compatibility against SKF documentation and the requirements of the specific application.
Bearing - ZARN60120-TV-A INA
is a combined INA bearing designed for applications requiring reliable radial and axial load capacity. Bore d: 60 mm. Outside diameter D: 105 mm. Width B: 82 mm. Flange diameter D1: 120 mm. Polyamide cage, without seal. Load ratings: dynamic radial 44,500 N, static radial 92,000 N; dynamic axial 187,000 N, static axial 550,000 N Speed: 950 rpm with grease, 2,700 rpm with oil. Do not confuse the bearing….
Bearing - 6202 2Z FAG
15 × 35 × 11 mm. ball bearing for replacement use. Before ordering, compare the complete designation and verify the dimensions, design and fit with the original part. Confirm compatibility against FAG documentation and the requirements of the specific application. Metal shields on both sides.
Needle roller bearing - HK 4020 INA
40 × 47 × 20 mm. INA needle roller bearing HK 4020 for replacement use. Before ordering, compare the complete designation and verify dimensions, design and fit with the original part. Confirm compatibility using manufacturer documentation and the requirements of the specific application.
Bearing - PLC 15 12 ZKL
35 × 68 × 37 mm. Sealed double-row angular-contact ball bearing by ZKL.
Product rating
Be the first who will post an article to this item!
We can arrange delivery of almost any KINEX product, even if it is not currently listed in our catalogue.
Send us the designation, a photo of the nameplate, dimensions or a description of the application, and we will check availability.
KINEX – product identification and supply
The KINEX designation may appear on different technical products and spare parts. To identify the exact item reliably, we therefore work from the complete marking and the available technical data.
The exact item should be selected by its complete designation and technical parameters. Dimensions, design, material and operating conditions are important when matching a replacement.
For an accurate quotation, please provide the full marking, required quantity and any available documentation. We will compare the specification and verify a suitable delivery option.