Bearing - 6205 C3 KINEX
Needle roller bearing - HK 5024 2RS A L271 INA
50 × 58 × 24 mm. INA needle roller bearing HK 5024 2RS A L271 for replacement use. Before ordering, compare the complete designation and verify dimensions, design and fit with the original part. Confirm compatibility using manufacturer documentation and the requirements of the specific application.
Bearing - 30308 AJ2 ZKL
40 × 90 × 25.25 mm. single-row tapered roller bearing for high combined radial and axial loads. Its separable design accommodates axial load in one direction and allows accurate adjustment of clearance or preload during installation.
Bearing - 6207 ZKL
35 × 72 × 17 mm. Single-row open deep groove ball bearing for radial loads and axial loads in both directions. The open design allows the lubrication method to be selected for the specific bearing arrangement.
Bearing - PLC 23 5 ZKL
30 × 49.25 × 13.6 mm. ZKL PLC 23-5 special clutch ball bearing with a pressed-steel housing and steel cage. Intended for the later clutch design used on. Škoda 105–130 vehicles; always confirm compatibility by designation and dimensions.
Bearing - UC 206 MGK
30 × 62 × 38.1 mm. Technické provedení a kompatibilitu ověřte podle úplného označení výrobce a požadavků aplikace.
Spherical plain bearing - GAL 35 UK 2RS ELGES
with rubber seals on both sides spherical plain bearing for replacement use. Before ordering, compare the complete designation and verify the dimensions, design and fit with the original part. Confirm compatibility against ELGES documentation and the requirements of the specific application.
Bearing - 6208 2Z ZKL
40 × 80 × 18 mm. Metal shields on both sides single-row deep-groove ball bearing with a steel cage and non-contact shielding. Low friction and shields on both sides help retain the lubricant inside the bearing.
Bearing - YAT 205 SKF
25 × 52 × 27.2 mm. insert ball bearing with a narrow inner ring extended on one side and locking by two set screws. Standard contact seals on both sides protect the grease and bearing interior.
Bearing - F 6003 2RS neu
17 × 35 × 10 mm. neu F 6003 2RS bearing for replacement use. Before ordering, compare the complete designation and verify the dimensions, design and fit with the original part. Confirm compatibility against neu documentation and the requirements of the specific application.
Bearing - 32313 A FAG
65 × 140 × 51 mm. bearing. Verify the complete designation and dimensions in manufacturer documentation before selection.
Bearing - VKBA 3570 SKF
Bearing.
Bearing - B7212-C-T-P4S-UM FAG
Bearing.
Bearing - 6209 2RS FLT
Bearing.
Bearing - VKBA 6571 SKF
Bearing.
Bearing - K 55x60x17 NEU
Bearing.
Product rating
Be the first who will post an article to this item!
We can arrange delivery of almost any KINEX product, even if it is not currently listed in our catalogue.
Send us the designation, a photo of the nameplate, dimensions or a description of the application, and we will check availability.
KINEX – product identification and supply
The KINEX designation may appear on different technical products and spare parts. To identify the exact item reliably, we therefore work from the complete marking and the available technical data.
The exact item should be selected by its complete designation and technical parameters. Dimensions, design, material and operating conditions are important when matching a replacement.
For an accurate quotation, please provide the full marking, required quantity and any available documentation. We will compare the specification and verify a suitable delivery option.