Bearing - 6208 N ZKL
Product detailed description
Bearing - 6208 N ZKL
6208 N ZKL is an open single-row deep groove ball bearing with dimensions 40 × 80 × 18 mm (d×D×B). Its deep raceways carry mainly radial load and also axial load in both directions. The outer ring has a groove for a snap ring, enabling simple axial location of the bearing in a housing where the surrounding design is suitable.
Key features
- Designation: 6208 N ZKL
- Type: single-row deep groove ball bearing
- Dimensions d×D×B: 40 × 80 × 18 mm
- Manufacturer: ZKL
- Design: open, without integrated shields or seals
- Outer ring: snap-ring groove, suffix N
- Loads: radial and axial loads in both directions
Applications
Suitable for electric motors, gearboxes, pumps, fans and general industrial equipment where low friction, accurate shaft guidance and axial retention of the outer ring are required. The open design requires suitable lubrication and protection against contamination from the surrounding assembly.
Selection and installation
The N suffix denotes a groove in the outer ring only; it must not be confused with NR, which normally denotes a groove with a snap ring. Before ordering, verify whether the retaining ring is required and supplied separately. Mount in clean conditions, apply force only through the ring being fitted and ensure the housing shoulder or retaining ring cannot contact rotating parts.
Product rating
Be the first who will post an article to this item!
We can arrange delivery of almost any ZKL product, even if it is not currently listed in our catalogue.
Send us the designation, a photo of the nameplate, dimensions or a description of the application, and we will check availability.
ZKL – product identification and supply
The ZKL designation may appear on different technical products and spare parts. To identify the exact item reliably, we therefore work from the complete marking and the available technical data.
The exact item should be selected by its complete designation and technical parameters. Dimensions, design, material and operating conditions are important when matching a replacement.
For an accurate quotation, please provide the full marking, required quantity and any available documentation. We will compare the specification and verify a suitable delivery option.
| Manufacturing company : | ZKL, a.s. |
|---|---|
| Address : | Jedovnická 2346/8, 628 00 Brno, Czech Republic |
| E-mail : | head@zkl.cz |