Bearing - 6301 2Z ZKL
Product detailed description
Bearing - 6301 2Z ZKL
ZKL 6301 2Z bearing is a single-row deep groove ball bearing with dimensions of 12 × 37 × 12 mm. The 2Z suffix denotes a metal shield on both sides. These non-contact shields help retain grease and reduce the ingress of larger contaminants while maintaining low friction. The bearing supports radial loads as well as axial loads in both directions.
Technical data
| Designation | 6301-2Z |
|---|---|
| Manufacturer | ZKL |
| Type | single-row deep groove ball bearing, shielded on both sides |
| Bore diameter d | 12 mm |
| Outside diameter D | 37 mm |
| Width B | 12 mm |
| Mass | 0.06 kg |
| Basic dynamic load rating Cr | 9.8 kN |
| Basic static load rating C0r | 4.2 kN |
| Fatigue load limit Cu | 0.19 kN |
| Reference speed – grease | 20,000 min−1 |
What the 2Z design means
- a metal shield on each side of the bearing,
- non-contact construction for low friction,
- protection against larger solid contaminants; it is not a contact seal against liquids.
Check before ordering
Compare the 6301 2Z designation, dimensions and double metal shielding with the original bearing or technical documentation. The actual permissible operating speed depends on load, temperature, fit and lubricant condition. If you need help confirming a replacement, send us the full designation or a photo of the original part.
Product rating
Be the first who will post an article to this item!
We can arrange delivery of almost any ZKL product, even if it is not currently listed in our catalogue.
Send us the designation, a photo of the nameplate, dimensions or a description of the application, and we will check availability.
ZKL – product identification and supply
The ZKL designation may appear on different technical products and spare parts. To identify the exact item reliably, we therefore work from the complete marking and the available technical data.
The exact item should be selected by its complete designation and technical parameters. Dimensions, design, material and operating conditions are important when matching a replacement.
For an accurate quotation, please provide the full marking, required quantity and any available documentation. We will compare the specification and verify a suitable delivery option.
| Manufacturing company : | ZKL, a.s. |
|---|---|
| Address : | Jedovnická 2346/8, 628 00 Brno, Czech Republic |
| E-mail : | head@zkl.cz |