Bearing - 6303 ZC3 ZKL

45x75x20 mm

Single-row tapered roller bearing 32009 AX ZKL for high radial load combined with axial load in one direction. Its separable design allows the inner ring with rollers and the outer ring to be mounted independently.

40x62x22 mm

Single-row cylindrical roller bearing NU 4908 DKF for high radial loads and free axial displacement of the shaft relative to the housing in both directions. The NU design has two guiding flanges on the outer ring and a flange-free inner ring.

35x53.6x12.8 mm

Special single-direction thrust ball bearing 511Z35 ZKL for axial load in one direction. Separable design with a shaft washer, housing washer and ball-and-cage assembly; compare the full designation and dimensions before replacement.

35x72x23 mm

Double-row self-aligning ball bearing 2207 ZKL with a cylindrical bore. The spherical outer-ring raceway accommodates angular misalignment; suitable primarily for radial load and limited axial load in both directions.

55x72x9 mm

Thin-section single-row deep groove ball bearing 61811 2RZ SKF with low-friction seals on both sides. It combines a compact radial section with low friction and carries radial loads plus axial loads in both directions.

Deep groove ball bearing 6012 SKF is a single-row bearing in an open design. It accommodates radial loads and moderate axial loads in both directions and is suitable for accurate shaft support.

The open construction has no integral shields or seals, allowing direct lubricant access but requiring a clean or externally protected environment and a correctly designed lubrication system.

50x80x20 mm

Single-row tapered roller bearing 32010 JR DPI for high radial load combined with axial load in one direction. Its separable design allows the inner ring with rollers and the outer ring to be mounted independently.

6022 2Z C3 FAG deep-groove ball bearing is a single-row bearing with steel shields on both sides and C3 radial internal clearance. It carries radial loads and moderate axial loads in both directions and is suitable for higher-speed operation.

51105 ZKL single-direction thrust ball bearing is a separable bearing for axial load in one direction. It consists of a shaft washer, housing washer and ball-and-cage assembly and is not designed to carry radial load.

50x80x20 mm

Single-row tapered roller bearing 32010 X FAG with a separable design for high combined radial and one-direction axial loads. Compare the exact X variant with the original part; this product designation does not include XL.