Bearing - 6304 2RSR KINEX
Bearing - VKBA 6571 SKF
Bearing.
Bearing - 6008 2RS SKF
40 × 68 × 15 mm. Single-row deep groove ball bearing; the corresponding SKF catalogue designation is 6008-2RS1. Contact seals on both sides help retain the grease and protect the bearing against contamination.
Bearing - 623 2Z ZKL
3 × 10 × 4 mm. Single-row deep-groove ball bearing. Metal shields on both sides; compare the complete designation, including suffixes.
Bearing - NU 2207 ZKL
35 × 72 × 23 mm. single-row cylindrical roller bearing for high radial loads. The NU design has two integral flanges on the outer ring and permits axial displacement of the shaft relative to the housing in both directions, making it suitable for a non-locating bearing position.
Bearing - 6202 2Z FAG
15 × 35 × 11 mm. ball bearing for replacement use. Before ordering, compare the complete designation and verify the dimensions, design and fit with the original part. Confirm compatibility against FAG documentation and the requirements of the specific application. Metal shields on both sides.
Bearing - 6208 2Z ZKL
40 × 80 × 18 mm. Metal shields on both sides single-row deep-groove ball bearing with a steel cage and non-contact shielding. Low friction and shields on both sides help retain the lubricant inside the bearing.
Needle roller bearing - HK 1412 NTN
14 × 20 × 12 mm. NTN needle roller bearing HK 1412 for replacement use. Before ordering, compare the complete designation and verify dimensions, design and fit with the original part. Confirm compatibility using manufacturer documentation and the requirements of the specific application.
Bearing - B7213-E-T-P4S-UL FAG
Bearing.
Bearing - 624 2Z SKF
4 × 13 × 5 mm. Metal shields on both sides.
Needle roller bearing - HK 3520 MTM
35 × 42 × 20 mm. MTM needle roller bearing HK 3520 for replacement use. Before ordering, compare the complete designation and verify dimensions, design and fit with the original part. Confirm compatibility using manufacturer documentation and the requirements of the specific application.
Bearing - 6207 ZKL
35 × 72 × 17 mm. Single-row open deep groove ball bearing for radial loads and axial loads in both directions. The open design allows the lubrication method to be selected for the specific bearing arrangement.
Spherical plain bearing - GAKFR 16 PB ELGES
spherical plain bearing for replacement use. Before ordering, compare the complete designation and verify the dimensions, design and fit with the original part. Confirm compatibility against ELGES documentation and the requirements of the specific application.
Spherical plain bearing - GE 8 NEU
8 × 16 × 8 mm. spherical plain bearing for replacement use. Before ordering, compare the complete designation and verify the dimensions, design and fit with the original part. Confirm compatibility against NEU documentation and the requirements of the specific application.
Bearing - 6201 2RSR FAG
12 × 32 × 10 mm. Single-row FAG 6201-2RSR deep groove ball bearing with seals on both sides and a sheet-steel cage. A versatile design for radial loads and axial loads in both directions.
Bearing - 62206 2RS1 SKF
30 × 62 × 20 mm. Rubber seals on both sides. The deep-groove ball bearing is a single-row bearing with contact seals on both sides. Its 30 × 62 × 20 mm dimensions, factory grease fill and effective lubricant retention make it suitable for compact, protected bearing arrangements.
Spherical plain bearing - GAL 35 UK 2RS ELGES
with rubber seals on both sides spherical plain bearing for replacement use. Before ordering, compare the complete designation and verify the dimensions, design and fit with the original part. Confirm compatibility against ELGES documentation and the requirements of the specific application.
Product rating
Be the first who will post an article to this item!
We can arrange delivery of almost any KINEX product, even if it is not currently listed in our catalogue.
Send us the designation, a photo of the nameplate, dimensions or a description of the application, and we will check availability.
KINEX – product identification and supply
The KINEX designation may appear on different technical products and spare parts. To identify the exact item reliably, we therefore work from the complete marking and the available technical data.
The exact item should be selected by its complete designation and technical parameters. Dimensions, design, material and operating conditions are important when matching a replacement.
For an accurate quotation, please provide the full marking, required quantity and any available documentation. We will compare the specification and verify a suitable delivery option.