Bearing - 6310 2RS C3 ZKL

2302 2RS CODEX self-aligning ball bearing has two rows of balls and a spherical raceway in the outer ring, allowing it to compensate for angular misalignment between the shaft and housing. Rubber seals on both sides protect the factory grease and the bearing interior against common contaminants.

12x22x10 mm

The GE 12 E BBC radial spherical plain bearing is a compact sliding bearing with spherical sliding surfaces. It accommodates tilting, slow oscillating movement and misalignment under radial and combined loads.

This open, unsealed design is suitable for linkages, small hydraulic mechanisms and machine joints with regular lubrication and external contamination protection.

50x90x20 mm

The 6210 N KINEX deep-groove ball bearing is a single-row radial bearing with a snap-ring groove in the outer ring. The groove simplifies axial location in the housing, while the deep raceways support radial loads and moderate axial forces in both directions.

This open, unsealed design is suitable for gearboxes, electric motors and industrial positions with a separate lubrication system.

50x80x16 mm

6010 ROLLWAY deep-groove ball bearing is a single-row radial bearing in the slim 60 series for a 50 mm shaft. Deep raceways support radial loads and moderate axial forces in both directions with low friction. The open design suits clean, correctly lubricated assemblies or machines that provide separate external protection.

17x40x17 mm

The 3203 2RS neu double-row angular contact ball bearing supports radial loads, axial forces in both directions and tilting moments. Contact rubber seals on both sides help retain grease and protect the raceways from common contaminants.

A compact solution for gearboxes, pumps, hubs, agricultural machinery and other positions requiring increased axial rigidity.

629 2RS KINEX deep-groove ball bearing is a single-row bearing with rubber seals on both sides. It carries radial loads and moderate axial loads in both directions while protecting the factory grease against leakage and common contaminants.

YAR 207 2F SKF insert bearing has an inner ring extended on both sides and locks onto the shaft with two set screws. A spherical outside surface, contact seals with flingers on both sides and relubrication capability support easy installation and reliable operation.

20x35x10 mm

51104 ZVL single-direction thrust ball bearing is a separable bearing designed to carry axial load in one direction. It consists of a shaft washer, housing washer and ball-and-cage assembly. It is not intended for radial loading or for accommodating misalignment.

20x52x22 mm

F 576208 3304 FAG double-row angular-contact ball bearing carries high radial loads together with axial forces in both directions. Two ball rows provide rigid axial location and the ability to support tilting moments in a compact unit. It suits positions where a single-row ball bearing does not provide sufficient axial capacity. F 576208 is a special FAG production designation; compare the complete code with the original part before substitution.

6304-C-2HRS-C3 FAG deep-groove ball bearing is a Generation C single-row bearing with HRS contact seals on both sides and C3 radial internal clearance. It combines reliable grease protection with low friction and carries radial loads and moderate axial loads in both directions.