Bearing - 6313 MP63 ZKL

50x80x16 mm

6010 ROLLWAY deep-groove ball bearing is a single-row radial bearing in the slim 60 series for a 50 mm shaft. Deep raceways support radial loads and moderate axial forces in both directions with low friction. The open design suits clean, correctly lubricated assemblies or machines that provide separate external protection.

NA 4906 V DKF needle roller bearing is a full-complement radial bearing with machined outer and inner rings. The high number of needles provides high radial load capacity in a small radial cross-section; the design is intended for carefully lubricated arrangements at moderate speeds.

17x40x17 mm

The 3203 2RS neu double-row angular contact ball bearing supports radial loads, axial forces in both directions and tilting moments. Contact rubber seals on both sides help retain grease and protect the raceways from common contaminants.

A compact solution for gearboxes, pumps, hubs, agricultural machinery and other positions requiring increased axial rigidity.

16x52x43.2 mm

FRR 52-1 AS NADELLA guide roller is a stud-type roller for linear guides and cam tracks. Its 52 mm outside diameter provides a durable rolling surface, while the eccentric stud allows precise positional adjustment relative to the track. Retain the complete -1 AS designation when replacing it and compare it with the original part.

50x110x29.25 mm

30310 A ZKL tapered roller bearing is a robust single-row bearing for high radial loads combined with axial load in one direction. Its separable design allows the inner ring with rollers and the outer ring to be mounted independently. For a correct replacement, compare the complete designation including suffix A, the dimensions and required clearance with the original part.

35x72x42.9 mm

The UC 207 DKF insert bearing is a sealed ball-bearing insert with a spherical outside surface and an extended inner ring. It is secured to the shaft by two grub screws and is designed for installation in a matching bearing housing.

Suitable for conveyors, fans, agricultural machinery and simple industrial drives. This product is the UC insert only; a complete housing is not included.

15x42x17 mm

2302 2RS ZVL self-aligning ball bearing is a double-row bearing with a spherical outer-ring raceway and rubber seals on both sides. It accommodates moderate shaft-to-housing misalignment while carrying radial loads and light axial forces in either direction.

HK 3520 CX drawn-cup needle roller bearing is an open-ended, thin-walled bearing without an inner ring. It provides high radial load capacity in a very small radial space; a suitably hardened and precision-ground shaft forms the inner raceway.

12x22x10 mm

The GE 12 E BBC radial spherical plain bearing is a compact sliding bearing with spherical sliding surfaces. It accommodates tilting, slow oscillating movement and misalignment under radial and combined loads.

This open, unsealed design is suitable for linkages, small hydraulic mechanisms and machine joints with regular lubrication and external contamination protection.

50x90x51.6 mm

UC 210 URB insert ball bearing is a sealed housing bearing with a spherical outside surface and extended inner ring. It is secured to a 50 mm shaft by two set screws. The design accommodates minor initial mounting misalignment inside a compatible housing.

6x19x6 mm

626 2RSR ZWICKER miniature ball bearing is a single-row radial bearing for a 6 mm shaft with rubber seals on both sides. It carries radial load and lighter axial forces in either direction. The 2RSR design protects the lubricant and rolling contact in small drives and precision mechanisms.