Bearing - 7206 ZKL

Not rated Rating details

Brand: ZKL

€6,46 / pcs €5,34 excl. VAT

In stock (9 pcs)

Delivery to:

Delivery options

Quantity discount

1 - 4 pcs

€6,46 / pcs

5 - 9 pcs = discount 3 %

€6,27 / pcs

10 - 24 pcs = discount 6 %

€6,07 / pcs

25 - 49 pcs = discount 9 %

€5,88 / pcs

50 and more pcs = discount 12 %

€5,68 / pcs

You save €0

Bearing - 7206 ZKL

30 × 62 × 16 mm. angular-contact ball bearing for combined radial and axial loads.

Detailed information

Expert advice

We help you choose the right type, size and version

Fast dispatch from stock

Stock items are dispatched without unnecessary waiting

Verified product specifications

Accurate designation, dimensions and technical data

We can source less common types

We help find special, older or hard-to-find versions

Product detailed description

Bearing - 7206 ZKL

7206 ZKL angular-contact ball bearing

The single-row angular-contact ball bearing 7206 from ZKL has dimensions of 30 × 62 × 16 mm. Its asymmetrical raceways allow it to support radial load together with axial load in one direction.

For axial loads in both directions or for a rigid arrangement, these bearings are used in a suitably selected pair. Pairing arrangement, operating clearance and any preload must always match the design of the specific bearing location.

Technical details

designation: 7206 ZKL,
inside diameter: 30 mm,
outside diameter: 62 mm,
width: 16 mm,
type: single-row angular-contact ball bearing.

Check before ordering

Compare the complete designation, dimensions, contact angle and pairing method with the original part or technical documentation. The designation on this product page does not specify contact angle or preload; if you are unsure, send us the designation of the original bearing.

Additional parameters

Category:	Bearings
Inner diameter d (mm):	30
Outer diameter D (mm):	62
Width B (mm):	16

Bearing - YAT 205 SKF

In stock (8 pcs)

€12,33 excl. VAT

€14,92

Bearing - YAT 205 SKF

25 × 52 × 27.2 mm. insert ball bearing with a narrow inner ring extended on one side and locking by two set screws. Standard contact seals on both sides protect the grease and bearing interior.

YAT 205 SKF

Bearing - 6002 2RSH SKF

In stock (6 pcs)

€2,20 excl. VAT

€2,66

Bearing - 6002 2RSH SKF

15 × 32 × 9 mm. Single-row SKF 6002-2RSH deep groove ball bearing in SKF Explorer performance class. NBR contact seals on both sides help retain the grease and protect the bearing against contamination.

6002 2RSH SKF

Bearing - 6001 2Z SKF

In stock (5 pcs)

€2,02 excl. VAT

€2,45

Bearing - 6001 2Z SKF

12 × 28 × 8 mm. single-row deep groove ball bearing with non-contact metal shields on both sides. It combines low friction and lubricant retention with the ability to carry radial and moderate axial loads in both directions.

6001 2Z SKF

Bearing - W 6208 2RS1 SKF

In stock (2 pcs)

€97,63 excl. VAT

€118,13

Bearing - W 6208 2RS1 SKF

40 × 80 × 18 mm. SKF bearing for industrial applications. When replacing a part, always verify the complete designation, dimensions, design and application requirements against the manufacturer documentation.

2402667

Spherical plain bearing - GAKFR 16 PB ELGES

In stock (25 pcs)

€20,23 excl. VAT

€24,48

Spherical plain bearing - GAKFR 16 PB ELGES

spherical plain bearing for replacement use. Before ordering, compare the complete designation and verify the dimensions, design and fit with the original part. Confirm compatibility against ELGES documentation and the requirements of the specific application.

GAKFR 16 PB ELGES

Bearing - 51205 DKF

€3,31 excl. VAT

€4,01

Bearing - 51205 DKF

25 × 47 × 15 mm. Bearing. Verify the complete designation and dimensions in manufacturer documentation before selection.

51205 DKF

Bearing - B71906 C T P4S UL FAG

In stock (4 pcs)

€96,61 excl. VAT

€116,90

Bearing - B71906 C T P4S UL FAG

30 × 47 × 9 mm. Technické provedení a kompatibilitu ověřte podle úplného označení výrobce a požadavků aplikace.

B 71906 CTP4SUL FAG

Bearing - 16115 STEYR

€65,80 excl. VAT

€79,62

Bearing - 16115 STEYR

75 × 110 × 12 mm. Open single-row deep-groove ball bearing with a slim cross-section. The unshielded and unsealed design provides direct access for lubrication but requires a clean and suitably lubricated installation.

2402913

Bearing - 30308 AJ2 ZKL

In stock (7 pcs)

€7,74 excl. VAT

€9,36

Bearing - 30308 AJ2 ZKL

40 × 90 × 25.25 mm. single-row tapered roller bearing for high combined radial and axial loads. Its separable design accommodates axial load in one direction and allows accurate adjustment of clearance or preload during installation.

30308 AJ2 ZKL

Bearing - 62206 2RS1 SKF

In stock (4 pcs)

€16,18 excl. VAT

€19,58

Bearing - 62206 2RS1 SKF

30 × 62 × 20 mm. Rubber seals on both sides. The deep-groove ball bearing is a single-row bearing with contact seals on both sides. Its 30 × 62 × 20 mm dimensions, factory grease fill and effective lubricant retention make it suitable for compact, protected bearing arrangements.

220

Bearing - 1308 ZKL

In stock (1 pcs)

€6,59 excl. VAT

€7,97

Bearing - 1308 ZKL

40 × 90 × 23 mm. ball bearing for replacement use. Before ordering, compare the complete designation and verify the dimensions, design and fit with the original part. Confirm compatibility against ZKL documentation and the requirements of the specific application.

1308 ZKL

Bearing - 203 KRR AH02 CRAFT

In stock (34 pcs)

€10,10 excl. VAT

€12,22

Bearing - 203 KRR AH02 CRAFT

ball bearing for replacement use. Before ordering, compare the complete designation and verify the dimensions, design and fit with the original part. Confirm compatibility against CRAFT documentation and the requirements of the specific application. 16.2 × 40 × 18.3 mm.

2402403

Bearing - UC 206 MGK

In stock (5 pcs)

€10,10 excl. VAT

€12,22

Bearing - UC 206 MGK

30 × 62 × 38.1 mm. Technické provedení a kompatibilitu ověřte podle úplného označení výrobce a požadavků aplikace.

UC 206 MGK

Show all alternative products

Product rating

Be the first who will post an article to this item!

Name

E-mail

Comment

How would you rate this product? Choose 1 to 5 stars, where 1 is the worst and 5 is the best rating.

Discussion

Be the first who will post an article to this item!

Only registered users can submit posts. Please log in or sign up.

We can arrange delivery of almost any ZKL product, even if it is not currently listed in our catalogue.

Send us the designation, a photo of the nameplate, dimensions or a description of the application, and we will check availability.

ZKL – product identification and supply

The ZKL designation may appear on different technical products and spare parts. To identify the exact item reliably, we therefore work from the complete marking and the available technical data.

The exact item should be selected by its complete designation and technical parameters. Dimensions, design, material and operating conditions are important when matching a replacement.

For an accurate quotation, please provide the full marking, required quantity and any available documentation. We will compare the specification and verify a suitable delivery option.

Manufacturing company :	ZKL, a.s.
Address :	Jedovnická 2346/8, 628 00 Brno, Czech Republic
E-mail :	head@zkl.cz