Bearing - DBK 5025 DURKOPP
Product detailed description
Bearing - DBK 5025 DURKOPP
Bearing DBK 5025 DURKOPP.
Verify the exact design and compatibility using the manufacturer designation and application requirements.
Bearing - 6202 2Z FAG
15 × 35 × 11 mm. ball bearing for replacement use. Before ordering, compare the complete designation and verify the dimensions, design and fit with the original part. Confirm compatibility against FAG documentation and the requirements of the specific application. Metal shields on both sides.
Bearing - 6208 2Z ZKL
40 × 80 × 18 mm. Metal shields on both sides single-row deep-groove ball bearing with a steel cage and non-contact shielding. Low friction and shields on both sides help retain the lubricant inside the bearing.
Bearing - 4206 ATN9 SKF
Bearing.
Bearing - NU 2207 ZKL
35 × 72 × 23 mm. single-row cylindrical roller bearing for high radial loads. The NU design has two integral flanges on the outer ring and permits axial displacement of the shaft relative to the housing in both directions, making it suitable for a non-locating bearing position.
Bearing - 6209 K ZKL
45 × 85 × 19 mm. bearing with verified mounting dimensions; compare the complete K suffix before replacement.
Bearing - 16115 STEYR
75 × 110 × 12 mm. Open single-row deep-groove ball bearing with a slim cross-section. The unshielded and unsealed design provides direct access for lubrication but requires a clean and suitably lubricated installation.
Bearing - 6203 2RS NSK
17 × 40 × 12 mm. single-row deep-groove ball bearing with contact rubber seals on both sides. The closed design helps retain lubricant and protects the raceways from contamination and moisture.
Bearing - 624 2RS EU-ROLL
4 × 13 × 5 mm. Single-row deep-groove ball bearing. Rubber seals on both sides; compare the complete designation before ordering.
Bearing - 61804 2RS KINEX
20 × 32 × 7 mm. bearing for replacement use. Before ordering, compare the complete designation and verify the dimensions, design and fit with the original part. Confirm compatibility against KINEX documentation and the requirements of the specific application.
Bearing - 6007 2RS KINEX
Bearing.
Bearing - 6301 2RS KINEX
Bearing.
Spherical plain bearing - GAKFL 16 PB ELGES
16 × 32 × 21 mm. ELGES needle roller bearing GAKFL 16 PB for replacement use. Before ordering, compare the complete designation and verify dimensions, design and fit with the original part. Confirm compatibility using manufacturer documentation and the requirements of the specific application.
Bearing - K 35x45x30 NEU
Bearing.
Bearing - 3003 2RS C4 INA
17 × 35 × 14 mm. Rubber seals on both sides. Large radial internal clearance.
Bearing - 6303 2Z KINEX
17 × 47 × 14 mm. bearing for replacement use. Before ordering, compare the complete designation and verify the dimensions, design and fit with the original part. Confirm compatibility against KINEX documentation and the requirements of the specific application.
Needle roller bearing - HK 1412 NTN
14 × 20 × 12 mm. NTN needle roller bearing HK 1412 for replacement use. Before ordering, compare the complete designation and verify dimensions, design and fit with the original part. Confirm compatibility using manufacturer documentation and the requirements of the specific application.
Product rating
Be the first who will post an article to this item!
We can arrange delivery of almost any DURKOPP product, even if it is not currently listed in our catalogue.
Send us the designation, a photo of the nameplate, dimensions or a description of the application, and we will check availability.
DURKOPP – product identification and supply
The DURKOPP designation may appear on different technical products and spare parts. To identify the exact item reliably, we therefore work from the complete marking and the available technical data.
The exact item should be selected by its complete designation and technical parameters. Dimensions, design, material and operating conditions are important when matching a replacement.
For an accurate quotation, please provide the full marking, required quantity and any available documentation. We will compare the specification and verify a suitable delivery option.