Bearing - HS 20 SFM
Product detailed description
Bearing - HS 20 SFM
HS 20 SFM
This product is a SFM bearing with the complete designation HS 20 SFM. For a correct replacement or a new application, always compare the full designation rather than only its basic part.
Before ordering, verify the dimensions, design, internal clearance, cage, sealing and lubrication requirements against the manufacturer technical documentation. Every suffix in the designation forms part of the specification of this exact version.
Use suitable tools during installation and apply mounting force through the ring with the interference fit. Do not transmit force through the rolling elements and protect the bearing from contamination. Please contact us before ordering if compatibility is uncertain.
Spherical plain bearing - GAL 35 DO 2RS ELGES
with rubber seals on both sides spherical plain bearing for replacement use. Before ordering, compare the complete designation and verify the dimensions, design and fit with the original part. Confirm compatibility against ELGES documentation and the requirements of the specific application.
Bearing - 30213 E ZKL
65 × 120 × 24.75 mm. single-row tapered roller bearing for high combined radial and axial loads. Its separable design accommodates axial load in one direction and allows accurate adjustment of clearance or preload during installation.
Needle roller bearing - HK 3018 2RS INA
30 × 37 × 18 mm. INA needle roller bearing HK 3018 2RS for replacement use. Before ordering, compare the complete designation and verify dimensions, design and fit with the original part. Confirm compatibility using manufacturer documentation and the requirements of the specific application.
Bearing - 2205 2RSTNG NSK
25 × 52 × 18 mm. NSK bearing for industrial applications. When replacing a part, always verify the complete designation, dimensions, design and application requirements against the manufacturer documentation.
Bearing - 32211 A ZKL
55 × 100 × 26,75 mm. single-row tapered roller bearing for high combined radial and one-direction axial loads.
Bearing - 6002 2RSH SKF
15 × 32 × 9 mm. Single-row SKF 6002-2RSH deep groove ball bearing in SKF Explorer performance class. NBR contact seals on both sides help retain the grease and protect the bearing against contamination.
Bearing - 608 2Z SKF
8 × 22 × 7 mm. Single-row SKF bearing with non-contact metal shields on both sides (2Z) and normal radial clearance CN. Check the complete designation before ordering.
Bearing - K 55x60x30 NEU
Bearing.
Bearing - 16115 STEYR
75 × 110 × 12 mm. Open single-row deep-groove ball bearing with a slim cross-section. The unshielded and unsealed design provides direct access for lubrication but requires a clean and suitably lubricated installation.
Bearing - 6205VVCM NSK
Bearing.
Bearing - 61805 2RS SKF
25 × 37 × 7 mm. Single-row deep groove ball bearing with compact dimensions; the corresponding SKF catalogue designation is 61805-2RS1. Contact seals on both sides help retain the grease and protect the bearing against contamination.
Bearing - UC 206 MGK
30 × 62 × 38.1 mm. Technické provedení a kompatibilitu ověřte podle úplného označení výrobce a požadavků aplikace.
Bearing - 6201 2RSR FAG
12 × 32 × 10 mm. Single-row FAG 6201-2RSR deep groove ball bearing with seals on both sides and a sheet-steel cage. A versatile design for radial loads and axial loads in both directions.
Spherical plain bearing - GAKFR 14 PB ELGES
spherical plain bearing for replacement use. Before ordering, compare the complete designation and verify the dimensions, design and fit with the original part. Confirm compatibility against ELGES documentation and the requirements of the specific application.
Bearing - 6003 2RS SKF
Bearing.
Bearing - 1309 EKTN9 C3 SKF
45 × 100 × 25 mm. ball bearing for replacement use. Before ordering, compare the complete designation and verify the dimensions, design and fit with the original part. Confirm compatibility against SKF documentation and the requirements of the specific application.
Product rating
Be the first who will post an article to this item!
We can arrange delivery of almost any SFM product, even if it is not currently listed in our catalogue.
Send us the designation, a photo of the nameplate, dimensions or a description of the application, and we will check availability.
SFM – product identification and supply
The SFM designation may appear on different technical products and spare parts. To identify the exact item reliably, we therefore work from the complete marking and the available technical data.
The exact item should be selected by its complete designation and technical parameters. Dimensions, design, material and operating conditions are important when matching a replacement.
For an accurate quotation, please provide the full marking, required quantity and any available documentation. We will compare the specification and verify a suitable delivery option.