Bearing - NK 37/20 A FAG

25x47x12 mm

6005 FAG is an open, single-row deep-groove ball bearing. It supports radial load and moderate axial loads in both directions, while its low-friction design makes it suitable for higher speeds.

The open design has no shields or seals, allowing easy lubricant access and effective heat dissipation. It therefore requires a clean arrangement with suitable lubrication or external sealing.

25x62x17 mm

6305 2RSR FAG is a single-row deep-groove ball bearing with contact seals on both sides. The seals help retain lubricant and protect the rolling space from dust, moisture and other common contaminants.

Its versatile design supports radial load and moderate axial loads in both directions. It is well suited to applications where dependable bearing protection and low maintenance requirements are important.

50x75x35 mm
Radial spherical plain bearing GE 50 E 2RS ZVL for oscillating motion and angular misalignment
Rubber seals on both sides; verify the complete designation and lubrication regime before ordering.

8x22x7 mm

608 ZC4 ZKL is a single-row deep-groove ball bearing with one Z metal shield and very large C4 radial internal clearance. Its compact design supports radial and limited axial loads in both directions.

25x42x9 mm

61905 2RS1 SKF thin-section deep-groove ball bearing with contact seals on both sides for compact arrangements and effective lubricant protection.

30x72x19 mm
SKF 6306-2Z/C3 single-row deep-groove ball bearing with non-contact metal shields on both sides and greater-than-normal C3 radial clearance.

17x47x14 mm

6303 2RS SKF is a single-row deep-groove ball bearing with contact rubber seals on both sides. It supports radial and limited axial loads while protecting the lubricant and raceways in commonly contaminated operation.

25x52x15 mm
FAG 7205-B-XL-2RS-TVP single-row angular-contact ball bearing in X-life design, with rubber seals on both sides and a polyamide cage.

30x72x19 mm

6306 2Z TIMKEN is a single-row deep-groove ball bearing with two non-contact metal shields. Its versatile design supports radial load and moderate axial loads in both directions, while low friction makes it suitable for higher speeds.

The shields help retain lubricant and limit the entry of larger contaminants. This is a general-purpose machine bearing, not a contact-sealed or watertight design.