Bearing - NUP 224 MC3

Bearing - 6200 Z ZKL

10 × 30 × 9 mm. single-row deep groove ball bearing with a non-contact metal shield on one side. Suitable for radial and moderate axial loads in both directions when one side of the bearing needs protection from coarse contamination.

Bearing - 608 2RS ZKL

8 × 22 × 7 mm. Single-row deep-groove ball bearing with contact rubber seals on both sides (2RS). Verify the complete designation before ordering.

Double-row tapered roller bearing assembly TIMKEN 08125-90024. d = 31.75 mm; D = 58.738 mm; T = 32.542 mm.

Tapered roller bearing outer ring TIMKEN 02831. D = 80.963 mm; C = 17.463 mm. Separate tapered roller bearing component; not a complete bearing.

Bearing - 624 ZKL

4 × 13 × 5 mm. single-row deep groove ball bearing in an open design. Deep raceways carry radial and moderate axial loads in both directions with low friction.

Bearing - 6000 2RS ZVL

10 × 26 × 8 mm. single-row deep groove ball bearing with contact rubber seals on both sides. A compact solution for radial and moderate axial loads in both directions, protected against dust, contamination and lubricant loss.

Double-row tapered roller bearing assembly TIMKEN 07100-90045. Dimensions of this variant: unconfirmed.

Single-row tapered roller bearing TIMKEN 07097/07205. d = 25.001 mm; D = 51.999 mm; T = 15.011 mm.

Tapered roller bearing inner assembly (cone) TIMKEN 05068. d = 17.463 mm; B = 14.381 mm. Separate tapered roller bearing component; not a complete bearing.

Bearing - 6307 ZKL

35 × 80 × 21 mm. single-row deep groove ball bearing in an open design. Deep raceways carry radial and moderate axial loads in both directions with low friction.

Single-row tapered roller bearing TIMKEN 07093/07205. d = 23.813 mm; D = 51.999 mm; T = 15.011 mm.

Double outer ring for a tapered roller bearing TIMKEN 02823D. D = 76.2 mm; C = 38.1 mm. Separate tapered roller bearing component; not a complete bearing.