Bearing - SD 52 DIN 472 NEREZ NEU

Bearing - 6204 2RS ZVL

20 × 47 × 14 mm. single-row deep groove ball bearing with contact rubber seals on both sides. A compact solution for radial and moderate axial loads in both directions, protected against dust, contamination and lubricant loss.

Double outer ring for a tapered roller bearing TIMKEN 02823D. D = 76.2 mm; C = 38.1 mm. Separate tapered roller bearing component; not a complete bearing.

Bearing - 6015 M P6 URB

URB bearing 6015 M P6. Before ordering, compare the full designation and execution with the part used in your equipment.

Bearing - 6201 2ZR ZKL

Bearing - is a single-row deep groove ball bearing with a cylindrical bore, standard steel cage and two metallic shields 2ZR. The shields adhere to the flat surface of the inner ring. Dimensions: inner diameter d 12 mm, outer diameter D 32 mm, width B 10 mm; weight 0.037 kg. The bearing has normal. Cn internal clearance, standard precision and standard lubrication. confirms no external….

Bearing - 6204 2RS C3 SKF

20 × 47 × 14 mm. Single-row deep-groove ball bearing. Rubber seals on both sides; C3 means greater radial internal clearance, so verify suitability.

Tapered roller bearing inner assembly (cone) TIMKEN 03066X. d = 17 mm; B = 14.681 mm. Separate tapered roller bearing component; not a complete bearing.

Bearing - EE134100-30000 + 134143-30000 TIMKEN

EE134100 / 134143 TIMKEN TIMKEN rolling bearing for industrial use. Use only when designation, dimensions and design match the original part.

Bearing - 6308 2Z C3 SKF

40 × 90 × 23 mm. Metal shields on both sides. Greater radial internal clearance. Single-row deep-groove ball bearing for radial load and axial loads in both directions. Two non-contact metal shields retain lubricant with low friction; C3 clearance provides allowance for tight fits or elevated operating temperature.

Bearing - 3205 BD XL 2Z TVH FAG

FAG 3205-BD-XL-2Z-TVH – double-row angular contact ball bearing, shields on both sides; d=25 mm; D=52 mm; B=20.6 mm; m≈0.153 kg; 2Z; TVH; PA66.

Bearing - 6307 2RS1 SKF

35 × 80 × 21 mm. bearing for replacement use. Before ordering, compare the complete designation and verify the dimensions, design and fit with the original part. Confirm compatibility against SKF documentation and the requirements of the specific application.

Pair of angular contact thrust ball bearings NSK 100BAR10STYNDBLP4A. d = 100 mm; D = 150 mm; Overall assembly width 2B = 45 mm.