Bearing - SS 6001 2RS CRB

25x47x12 mm

6005 2RS SKF deep-groove ball bearing is a single-row radial bearing with rubber seals on both sides. It carries radial loads and moderate axial forces in either direction. The 2RS design helps protect the internal rolling contact from dust and moisture while retaining lubricant inside the bearing.

90x140x37 mm

The NN 3018 KMNA P51 ZKL double-row cylindrical roller bearing is a precision radial bearing with high rigidity and load capacity, intended particularly for machine-tool spindles and other demanding positions. Its tapered bore permits accurate radial-clearance adjustment during mounting.

The KMNA P51 configuration is part of the exact ZKL specification and must not be replaced by a standard NN 3018 without verifying every suffix.

15x42x17 mm

2302 2RS ZVL self-aligning ball bearing is a double-row bearing with a spherical outer-ring raceway and rubber seals on both sides. It accommodates moderate shaft-to-housing misalignment while carrying radial loads and light axial forces in either direction.

50x110x27 mm

The 6310 C 2HRS C3 FAG deep-groove ball bearing is a Generation C single-row bearing with contact seals on both sides and C3 radial internal clearance. It is grease-filled and normally requires no relubrication under suitable operating conditions.

Suitable for motors, pumps, fans, gearboxes and industrial drives requiring contamination protection and additional internal clearance for temperature or tight fits.

6304-C-2HRS-C3 FAG deep-groove ball bearing is a Generation C single-row bearing with HRS contact seals on both sides and C3 radial internal clearance. It combines reliable grease protection with low friction and carries radial loads and moderate axial loads in both directions.

2302 2RS CODEX self-aligning ball bearing has two rows of balls and a spherical raceway in the outer ring, allowing it to compensate for angular misalignment between the shaft and housing. Rubber seals on both sides protect the factory grease and the bearing interior against common contaminants.

25x42x9 mm

The 61905 2RS KINEX thin-section deep-groove ball bearing is a compact single-row bearing with contact rubber seals on both sides. It combines a small radial cross-section and low weight with the ability to support radial loads and moderate axial forces in both directions.

Suitable for small electric motors, instruments, gearboxes, robotics and other mechanisms with restricted radial space.

40x90x23 mm

6308 FAG deep-groove ball bearing is a single-row radial bearing in the robust 63 dimension series for a 40 mm shaft. Deep raceways support radial loads and moderate axial forces in both directions with smooth running and low friction. The open design suits clean, correctly lubricated assemblies or machines that provide separate external protection.

6208 2Z C3 SKF deep-groove ball bearing is a single-row bearing with steel shields on both sides and C3 radial internal clearance. It carries radial loads and moderate axial loads in both directions and is suitable for higher-speed operation.

20x52x15 mm

6304 Z ZKL deep-groove ball bearing is a single-row radial bearing with a non-contact metal shield on one side. It supports radial loads and moderate axial forces in both directions. The Z shield protects one side of the rolling contact while the open side permits lubricant access or machine-integrated sealing.