Bearing - SS 6203 2RS neu
Product detailed description
Bearing - SS 6203 2RS neu
SS 6203 2RS neu is a single-row stainless-steel deep-groove ball bearing with dimensions of 17 × 40 × 12 mm. The 2RS execution has contact rubber seals on both sides, while the SS prefix denotes a corrosion-resistant stainless-steel design.
Key features
- Material: stainless steel offers better resistance to moisture and mildly corrosive environments than standard bearing steel, but is not immune to every chemical.
- Design: non-separable single-row bearing for radial loads and moderate axial loads in both directions.
- 2RS seals: contact seals on both sides provide more effective protection than shields, with correspondingly higher friction.
- Lubrication: the sealed bearing is factory-filled with grease and is normally not relubricated in standard service.
- Dimensions: 17 mm bore, 40 mm outside diameter and 12 mm width.
Installation and use
Apply fitting force only through the ring with the interference fit and never through the balls. Do not damage the seals or wash the bearing, so the factory lubricant and protective function remain intact. Before ordering, compare the full designation SS 6203 2RS neu, dimensions, clearance, speed and operating environment with the original component.
Product rating
Be the first who will post an article to this item!
We can arrange delivery of almost any neu product, even if it is not currently listed in our catalogue.
Send us the designation, a photo of the nameplate, dimensions or a description of the application, and we will check availability.
neu – product identification and supply
The neu designation may appear on different technical products and spare parts. To identify the exact item reliably, we therefore work from the complete marking and the available technical data.
The exact item should be selected by its complete designation and technical parameters. Dimensions, design, material and operating conditions are important when matching a replacement.
For an accurate quotation, please provide the full marking, required quantity and any available documentation. We will compare the specification and verify a suitable delivery option.