Bearing - UK 211 JIB
Product detailed description
Bearing - UK 211 JIB
Bearing UK 211 JIB.
Verify the exact design and compatibility using the manufacturer designation and application requirements.
Additional parameters
| Category: | Bearings |
|---|---|
| Weight: | 0.25 kg |
Bearing - YAT 207 SKF
35 × 72 × 33 mm. SKF insert ball bearing with a cylindrical bore, spherical outside surface and set-screw locking.
Bearing - 626 2RS EU-ROLL
6 × 19 × 6 mm. Compact single-row deep groove ball bearing with contact rubber seals on both sides, helping protect the lubricant and bearing interior from contaminants.
Bearing - 6001 2RS SKF
12 × 28 × 8 mm. single-row deep groove ball bearing with contact rubber seals on both sides. A compact solution for radial and moderate axial loads in both directions, protected against dust, contamination and lubricant loss.
Bearing - 608 Z ZKL
8 × 22 × 7 mm. Single-row deep-groove ball bearing with a non-contact metal shield on one side (Z). Check the complete designation and application suitability.
Single-row tapered roller bearing TIMKEN 07093/07205. d = 23.813 mm; D = 51.999 mm; T = 15.011 mm.
Bearing - 623 ZKL
3 × 10 × 4 mm. single-row deep groove ball bearing in open design. A compact bearing for radial and moderate axial loads in both directions, intended for arrangements providing their own lubrication and protection.
Bearing - YAT 205 SKF
25 × 52 × 27.2 mm. insert ball bearing with a narrow inner ring extended on one side and locking by two set screws. Standard contact seals on both sides protect the grease and bearing interior.
Bearing - 309726 DA (VKBC 20012) SKF
34 × 64 × 37 mm. SKF 309726 DA compact double-row angular contact ball bearing, also listed under reference designation VKBC 20012. Intended for hub arrangements carrying combined radial and axial loads in both directions.
Bearing - 6004 2RS ZVL
20 × 42 × 12 mm. Single-row deep-groove ball bearing with rubber seals on both sides. Check the complete designation and suitability for the specific application.
Bearing - 609 2Z ZKL
9 × 24 × 7 mm. single-row deep groove ball bearing with non-contact metal shields on both sides. Suitable for radial and moderate axial loads in both directions, combining low friction with protection of the lubricant from larger contaminants.
Bearing - 6001 2RS ZVL
12 × 28 × 8 mm. Single-row deep-groove ball bearing with contact rubber seals on both sides (2RS). Check the complete designation and application suitability.
Bearing - 6307 2RS1 SKF
35 × 80 × 21 mm. bearing for replacement use. Before ordering, compare the complete designation and verify the dimensions, design and fit with the original part. Confirm compatibility against SKF documentation and the requirements of the specific application.
Tapered roller bearing inner assembly (cone) TIMKEN 09062. d = 15.875 mm; B = 21.539 mm. Separate tapered roller bearing component; not a complete bearing.
Bearing - 6307 ZKL
35 × 80 × 21 mm. single-row deep groove ball bearing in an open design. Deep raceways carry radial and moderate axial loads in both directions with low friction.
Bearing - 6203 2RSH SKF
17 × 40 × 12 mm. single-row deep groove ball bearing with contact rubber seals on both sides. A sealed bearing for radial and moderate axial loads in both directions, protected against contamination and lubricant loss.
Single-row tapered roller bearing TIMKEN 07100S/07205. d = 25.4 mm; D = 51.999 mm; T = 15.011 mm.
Product rating
Be the first who will post an article to this item!
We can arrange delivery of almost any JIB product, even if it is not currently listed in our catalogue.
Send us the designation, a photo of the nameplate, dimensions or a description of the application, and we will check availability.
JIB – product identification and supply
The JIB designation may appear on different technical products and spare parts. To identify the exact item reliably, we therefore work from the complete marking and the available technical data.
The exact item should be selected by its complete designation and technical parameters. Dimensions, design, material and operating conditions are important when matching a replacement.
For an accurate quotation, please provide the full marking, required quantity and any available documentation. We will compare the specification and verify a suitable delivery option.