Bearing - VKBC 20017 SKF

SKF BA 9 bearing for accurate replacement by the complete original-part designation.

Single-direction thrust ball bearing measuring 9 × 20 × 7 mm. It carries axial load in one direction, has a separable design and must not be subjected to radial load.

20x42x12 mm

6004 2Z ZVL single-row deep groove ball bearing with non-contact metal shields on both sides. Suitable for radial and moderate axial loads in both directions, combining low friction with protection of the lubricant from larger contaminants.

7x22x7 mm

627 ZKL single-row deep groove ball bearing in an open design. Deep raceways carry radial and moderate axial loads in both directions with low friction.

10x26x8 mm

Single-row 6000 ZR ZKL deep groove ball bearing with a non-contact metal shield on one side. It carries radial and limited axial loads in both directions; the open side provides access to the rolling contact.

15x35x11 mm

6202 2ZR ZKL single-row deep groove ball bearing with non-contact metal shields on both sides. Suitable for radial and moderate axial loads in both directions, combining low friction with protection of the lubricant from larger contaminants.

Rubber seals on both sides

20x42x16 mm

3004 2RS C3 FAG double-row angular contact ball bearing for combined radial and axial loads in both directions. The C3 version has greater axial internal clearance than standard CN.

30x62x23 mm

3206 ZKL double-row angular contact ball bearing for combined radial and axial loads in both directions. Its compact design provides rigid and accurate shaft guidance.

8x22x7 mm

608 2RS TIMKEN single-row deep groove ball bearing with contact rubber seals on both sides. It carries radial and moderate axial loads in both directions while protecting the rolling elements from dust, contamination and lubricant loss.