NJ2218ECJ
Product detailed description
Cylindrical roller bearing. Manufacturer: SKF. Designation: NJ2218ECJ. Price for 1 piece.
Bearing - 6005 2RS SKF
25 × 47 × 12 mm. deep-groove ball bearing is a single-row radial bearing with rubber seals on both sides. It carries radial loads and moderate axial forces in either direction. The 2RS design helps protect the internal rolling contact from dust and moisture while retaining lubricant inside the bearing.
Bearing - 6004 2RS ZVL
20 × 42 × 12 mm. Single-row deep-groove ball bearing with rubber seals on both sides. Check the complete designation and suitability for the specific application.
Bearing - 6215 2RS ZVL
75 × 130 × 25 mm. Bearing with rubber seals on both sides for use in machinery and equipment.
Bearing - 3206 ZKL
30 × 62 × 23 mm. double-row angular contact ball bearing for combined radial and axial loads in both directions. Its compact design provides rigid and accurate shaft guidance.
Bearing - 6000 2RSH SKF
10 × 26 × 8 mm. single-row deep groove ball bearing with contact rubber seals on both sides. A compact solution for radial and moderate axial loads in both directions, protected against dust, contamination and lubricant loss.
Bearing - 627 ZKL
7 × 22 × 7 mm. single-row deep groove ball bearing in an open design. Deep raceways carry radial and moderate axial loads in both directions with low friction.
Bearing - NU1040-XL-M1 FAG
Bearing - is a single-row cylindrical roller bearing in NU design with a solid brass M1 cage, cylindrical bore, no seals and normal. Cn clearance. It is an X-Life bearing. Dimensions: inner diameter d 200 mm, outer diameter D 310 mm, width B 51 mm; weight 14.6 kg. NU bearings carry radial forces and allow axial displacement in both directions, making them suitable as floating….
Bearing - 6202 ZKL
15 × 35 × 11 mm. single-row deep groove ball bearing in open design. A compact bearing for radial and moderate axial loads in both directions, intended for arrangements providing their own lubrication and protection.
Bearing - 6003 Z ZKL
17 × 35 × 10 mm. single-row deep-groove ball bearing with a non-contact metal shield on one side. The shield limits coarse contamination while retaining low friction and good high-speed capability.
Bearing - 609 2Z ZKL
9 × 24 × 7 mm. single-row deep groove ball bearing with non-contact metal shields on both sides. Suitable for radial and moderate axial loads in both directions, combining low friction with protection of the lubricant from larger contaminants.
Bearing - 6307 2RS1 SKF
35 × 80 × 21 mm. bearing for replacement use. Before ordering, compare the complete designation and verify the dimensions, design and fit with the original part. Confirm compatibility against SKF documentation and the requirements of the specific application.
Product rating
Be the first who will post an article to this item!
We can arrange delivery of almost any SKF product, even if it is not currently listed in our catalogue.
Send us the designation, a photo of the nameplate, dimensions or a description of the application, and we will check availability.
SKF – product identification and supply
The SKF designation may appear on different technical products and spare parts. To identify the exact item reliably, we therefore work from the complete marking and the available technical data.
The exact item should be selected by its complete designation and technical parameters. Dimensions, design, material and operating conditions are important when matching a replacement.
For an accurate quotation, please provide the full marking, required quantity and any available documentation. We will compare the specification and verify a suitable delivery option.
| Manufacturing company : | AB SKF (publ) |
|---|---|
| Address : | Sven Wingquists Gata 2, SE-415 50 Göteborg, Sweden |
| E-mail : | skf.cz@skf.com |