NJ312ECM

Bearing - 6407 SKF

35 × 90 × 23 mm. Rolling bearing for use in machinery and equipment.

Bearing - 6301 2Z ZKL

12 × 37 × 12 mm. single-row deep groove ball bearing with non-contact metal shields on both sides. Dynamic load rating 9.8 kN, mass 0.06 kg.

Bearing - 6308 2RS ZVL

40 × 90 × 23 mm. Rubber seals on both sides.

Bearing - 6906 2RS EZO

30 × 47 × 9 mm. Thin-section, single-row deep groove ball bearing with contact rubber seals on both sides. The CN-clearance design with a steel cage combines compact dimensions with protection of the lubricant from ordinary contaminants.

Bearing - 624 ZKL

4 × 13 × 5 mm. single-row deep groove ball bearing in an open design. Deep raceways carry radial and moderate axial loads in both directions with low friction.

Bearing - 6005 2RS SKF

25 × 47 × 12 mm. deep-groove ball bearing is a single-row radial bearing with rubber seals on both sides. It carries radial loads and moderate axial forces in either direction. The 2RS design helps protect the internal rolling contact from dust and moisture while retaining lubricant inside the bearing.

Bearing - 623 ZKL

3 × 10 × 4 mm. single-row deep groove ball bearing in open design. A compact bearing for radial and moderate axial loads in both directions, intended for arrangements providing their own lubrication and protection.

Bearing - 6001 2Z SKF

12 × 28 × 8 mm. single-row deep groove ball bearing with non-contact metal shields on both sides. It combines low friction and lubricant retention with the ability to carry radial and moderate axial loads in both directions.

Bearing - NU1040-XL-M1 FAG

Bearing - is a single-row cylindrical roller bearing in NU design with a solid brass M1 cage, cylindrical bore, no seals and normal. Cn clearance. It is an X-Life bearing. Dimensions: inner diameter d 200 mm, outer diameter D 310 mm, width B 51 mm; weight 14.6 kg. NU bearings carry radial forces and allow axial displacement in both directions, making them suitable as floating….