NU310ECJ/C3

Bearing - 6006 2RS ZVL

30 × 55 × 13 mm. Single-row deep-groove ball bearing with rubber seals on both sides. Check the complete designation and suitability for the specific application.

Bearing - 6005 2RS SKF

25 × 47 × 12 mm. deep-groove ball bearing is a single-row radial bearing with rubber seals on both sides. It carries radial loads and moderate axial forces in either direction. The 2RS design helps protect the internal rolling contact from dust and moisture while retaining lubricant inside the bearing.

Bearing - NU1040-XL-M1 FAG

Bearing - is a single-row cylindrical roller bearing in NU design with a solid brass M1 cage, cylindrical bore, no seals and normal. Cn clearance. It is an X-Life bearing. Dimensions: inner diameter d 200 mm, outer diameter D 310 mm, width B 51 mm; weight 14.6 kg. NU bearings carry radial forces and allow axial displacement in both directions, making them suitable as floating….

Bearing - 6216 2RS1 C3 SKF

80 × 140 × 26 mm. Rolling bearing for use in machinery and equipment.

Bearing - 6200 2RS SKF

10 × 30 × 9 mm. single-row deep-groove ball bearing with rubber seals on both sides. For radial loads and limited axial loads in either direction.

Bearing - 6301 2Z ZKL

12 × 37 × 12 mm. single-row deep groove ball bearing with non-contact metal shields on both sides. Dynamic load rating 9.8 kN, mass 0.06 kg.

Bearing - 627 ZKL

7 × 22 × 7 mm. single-row deep groove ball bearing in an open design. Deep raceways carry radial and moderate axial loads in both directions with low friction.

Bearing - 30204 A KLF

20 × 47 × 15.25 mm. single-row tapered roller bearing for combined radial and axial loads acting in one direction. Its separable design simplifies installation and accurate clearance adjustment.