Bearings, Page 2
Product sorting
List of products
Bearing - 6311 Z ZKL
55 × 120 × 29 mm. Metal shield on one side.
Bearing - 6011 2RSR FAG
55 × 90 × 18 mm. Single-row deep-groove ball bearing with rubber seals on both sides designation 2RSR. Bore diameter d = 55 mm, outside diameter D = 90 mm, width B = 18 mm.
Bearing - 6011 MA P6 FLT
55 × 90 × 18 mm. Higher P6 accuracy grade: before ordering, compare the complete designation and design with the original part and the manufacturer documentation.
Bearing - 6211 KINEX
55 × 100 × 21 mm. Single-row deep groove ball bearing.
Bearing - 6211DDUC3 NSK
single-row deep-groove ball bearing, seals on both sides; d=55 mm; D=100 mm; B=21 mm; DDU; C3; Cr=47.5 kN; C0r=29.3 kN; ngrease=4 300 min−1; m≈0.619 kg.
Bearing - 6211 C2 FLT
55 × 100 × 21 mm. FLT bearing for industrial applications. When replacing a part, always verify the complete designation, dimensions, design and application requirements against the manufacturer documentation.
Bearing - 7211 ACDGB P4A SKF
SKF 7211 ACDGB/P4A single-row angular contact ball bearing for precision applications and paired mounting.
Bearing - 7211 ACD P4ADBC SKF
Single-row angular contact ball bearing 7211ACD/P4ADBC SKF.: 55 × 100 × 42 mm, TB cage, P4, 25° contact angle, O-arrangement and heavy preload GC.: two-piece set, 55 × 100 × 21 mm per bearing, PEEK cage, better than P4 and medium preload.
Bearing - 30311 A ZKL
55 × 120 × 31.5 mm. ZKL bearing for industrial applications. When replacing a part, always verify the complete designation, dimensions, design and application requirements against the manufacturer documentation.
Bearing - 6211NR NTN
55 × 100 × 21 mm. NTN bearing for industrial applications. When replacing a part, always verify the complete designation, dimensions, design and application requirements against the manufacturer documentation.
Bearing - 6211 2Z SKF
55 × 100 × 21 mm. SKF bearing for industrial applications. When replacing a part, always verify the complete designation, dimensions, design and application requirements against the manufacturer documentation.
Bearing - N 211 GPZ
55 × 100 × 21 mm. Technické provedení a kompatibilitu ověřte podle úplného označení výrobce a požadavků aplikace.
Bearing - NJ 2311 M SRO
55 × 120 × 43 mm. Technické provedení a kompatibilitu ověřte podle úplného označení výrobce a požadavků aplikace.
Bearing - NA 6911 NKE
FAG NA6911 NKE needle roller cage, 55 × 80 × 45 mm, without a seal.
Bearing - 51211 A ZKL
55 × 90 × 22 mm. thrust ball bearing is designed to carry axial load in one direction. It is used where force acting along the shaft axis must be reliably supported.
Bearing - 51211 P5 FAG
55 × 90 × 22 mm. Higher accuracy class P5.
Bearing - 7211 ZKL
55 × 100 × 21 mm. Technické provedení a kompatibilitu ověřte podle úplného označení výrobce a požadavků aplikace.
Bearing - 6011 2ZR ZVL
55 × 90 × 18 mm. Single-row deep-groove ball bearing with metal shields on both sides contacting the smooth inner-ring shoulders. Bore diameter d = 55 mm, outside diameter D = 90 mm, width B = 18 mm.