Bearings, Page 2

25x62x17 mm
ZKL 6305 single-row deep-groove ball bearing in an open design.
For radial loads and limited axial loads in either direction.

25x62x17 mm
ZKL NJ 305 NA P6 single-row cylindrical roller bearing with high radial capacity, axial guidance in one direction and increased P6 accuracy. The NA design uses matched, non-interchangeable rings.

30x62x16 mm
SKF 6206 2RS C3 single-row deep-groove ball bearing with contact rubber seals on both sides and C3 radial internal clearance.

25x62x18.25 mm
KINEX 30305 A single-row tapered roller bearing for combined radial and axial loads acting in one direction; its separable design allows the cone assembly and outer ring to be mounted separately.

30x62x17.25 mm

30206 A KINEX is a single-row tapered roller bearing for combined radial and axial loads. Its separable design simplifies mounting and precise adjustment of clearance or preload.

25x62x17 mm

6305 2ZR FAG is a single-row deep-groove ball bearing with two non-contact metal shields. Its versatile design supports radial load and moderate axial loads in both directions, while low friction makes it suitable for higher speeds.

The shields help retain lubricant and limit the entry of larger contaminants. This is a general-purpose machine bearing, not a contact-sealed or watertight design.

25x62x17 mm

6305 2RSR FAG is a single-row deep-groove ball bearing with contact seals on both sides. The seals help retain lubricant and protect the rolling space from dust, moisture and other common contaminants.

Its versatile design supports radial load and moderate axial loads in both directions. It is well suited to applications where dependable bearing protection and low maintenance requirements are important.

30 × 62 × 23.8 mm

3206 C2 ZKL double-row angular contact ball bearing in an open design with reduced C2 internal clearance for combined loading.

25x62x17 mm

6305 F-HTO SKWC GERMANY deep-groove ball bearing is a single-row bearing in dimension series 63 for a 25 mm shaft. It carries radial loads and moderate axial loads in both directions and suits accurately aligned, smooth-running rotating assemblies. F-HTO is a manufacturer-specific variant code; verify its exact meaning and operating parameters against the original bearing or technical documentation before substitution.

35x62x14 mm

6007 2RS ZVL deep-groove ball bearing is a single-row radial bearing with rubber seals on both sides. It carries radial loads and moderate axial forces in either direction. The 2RS design helps protect the internal rolling contact from dust and moisture while retaining lubricant inside the bearing.

6305 2ZC3 SKF deep-groove ball bearing is a single-row bearing with steel shields on both sides and C3 radial internal clearance. It carries radial loads and moderate axial loads in both directions and is suitable for higher-speed operation.

Insert bearing YAR 206 2F SKF is designed for bearing units and is secured to the shaft by two set screws in the extended inner ring. This arrangement provides quick and reliable mounting.

A contact seal and flinger on both sides help protect the bearing from contaminants. The design is suitable for both constant and alternating directions of rotation.

25x62x17 mm

Single-row cylindrical roller bearing N 305 ZKL for high radial loads and accurate shaft guidance. The N design permits axial displacement of the shaft relative to the housing in both directions; when replacing, compare the complete designation and required internal clearance.

40x62x22 mm

Single-row cylindrical roller bearing NU 4908 DKF for high radial loads and free axial displacement of the shaft relative to the housing in both directions. The NU design has two guiding flanges on the outer ring and a flange-free inner ring.