Bearings, Page 24

Bearing - 6207 2Z ZKL

35 × 72 × 17 mm. deep-groove ball bearing is a single-row radial bearing with non-contact metal shields on both sides. It supports radial loading and moderate axial forces in either direction. The 2Z shields help retain lubricant and keep out coarse contaminants while maintaining low friction and suitability for higher speeds.

Bearing - 62202 2RS DPI

15 × 35 × 14 mm. deep-groove ball bearing is a single-row radial bearing with rubber seals on both sides. It carries radial loads and moderate axial forces in either direction. The 2RS design helps protect the internal rolling contact from dust and moisture while retaining lubricant inside the bearing.

Bearing - 6003 2RS FAG

17 × 35 × 10 mm. deep-groove ball bearing is a single-row radial bearing with rubber seals on both sides. It carries radial loads and moderate axial forces in either direction. The 2RS design helps protect the internal rolling contact from dust and moisture while retaining lubricant inside the bearing.

Bearing - 6204 2ZNR SKF

20 × 47 × 14 mm. deep-groove ball bearing is a single-row radial bearing with non-contact metal shields on both sides. It supports radial loading and moderate axial forces in either direction. The 2Z shields help retain lubricant and keep out coarse contaminants while maintaining low friction and suitability for higher speeds. The outer-ring groove and supplied NR snap ring provide straightforward axial….

Bearing - 6308 FAG

40 × 90 × 23 mm. deep-groove ball bearing is a single-row radial bearing in the robust 63 dimension series for a 40 mm shaft. Deep raceways support radial loads and moderate axial forces in both directions with smooth running and low friction. The open design suits clean, correctly lubricated assemblies or machines that provide separate external protection.

Bearing - 6203 C C3 FAG

17 × 40 × 12 mm. deep-groove ball bearing is an open single-row. Generation C bearing with greater-than-normal C3 radial internal clearance. It supports radial loads and moderate axial forces in both directions with low friction. C3 provides extra allowance for thermal expansion or tighter fits, but it must match the machine design.

Bearing - F 576208 3304 FAG

20 × 52 × 22 mm. double-row angular-contact ball bearing carries high radial loads together with axial forces in both directions. Two ball rows provide rigid axial location and the ability to support tilting moments in a compact unit. It suits positions where a single-row ball bearing does not provide sufficient axial capacity. F 576208 is a special FAG production designation; compare the complete code….

Bearing - 626 2RSR ZWICKER

6 × 19 × 6 mm. miniature ball bearing is a single-row radial bearing for a 6 mm shaft with rubber seals on both sides. It carries radial load and lighter axial forces in either direction. The 2RSR design protects the lubricant and rolling contact in small drives and precision mechanisms.

Bearing - 6200 2RS KINEX

Dimensions: 10 × 30 × 9 mm KINEX bearing for industrial applications. When replacing a part, always verify the complete designation, dimensions, design and application requirements against the manufacturer documentation.

Bearing - 51104 ZVL

single-direction thrust ball bearing; d=20 mm; D=35 mm; H=10 mm; Ca=14.25 kN; C0a=18.62 kN; ngrease=6 300 min−1; noil=8 400 min−1; m≈0.037 kg.

Bearing - 628 2Z KINEX

KINEX bearing for industrial applications. When replacing a part, always verify the complete designation, dimensions, design and application requirements against the manufacturer documentation.

Bearing - 61913 SKF

SKF rolling bearing for industrial bearing arrangements. Before selection, verify the complete designation, dimensions and operating parameters in the manufacturer documentation.

Bearing - 32307 A KINEX

35 × 80 × 32.75 mm. tapered roller bearing is a robust single-row bearing for high radial loads combined with axial load in one direction. Its separable design allows the inner ring with rollers and the outer ring to be mounted independently. For a correct replacement, compare the complete designation including suffix A, the dimensions and required clearance with the original part.

Bearing - UC 210 URB

50 × 90 × 51.6 mm. URB bearing for industrial applications. When replacing a part, always verify the complete designation, dimensions, design and application requirements against the manufacturer documentation.

Bearing - 6007 2RS ZVL

35 × 62 × 14 mm. deep-groove ball bearing is a single-row radial bearing with rubber seals on both sides. It carries radial loads and moderate axial forces in either direction. The 2RS design helps protect the internal rolling contact from dust and moisture while retaining lubricant inside the bearing.

Bearing - FRR 52-1 AS NADELLA

16 × 52 × 43.2 mm. guide roller is a stud-type roller for linear guides and cam tracks. Its 52 mm outside diameter provides a durable rolling surface, while the eccentric stud allows precise positional adjustment relative to the track. Retain the complete -1 AS designation when replacing it and compare it with the original part.

Bearing - 6304 Z ZKL

20 × 52 × 15 mm. ZKL bearing for industrial applications. When replacing a part, always verify the complete designation, dimensions, design and application requirements against the manufacturer documentation.