Bearings, Page 23

Bearing - 2308 ZKL

40 × 90 × 33 mm. double-row self-aligning ball bearing with a spherical outer-ring raceway to accommodate misalignment and shaft deflection.

Bearing - 22315 J ZKL

75 × 160 × 55 mm. double-row spherical roller bearing with high load capacity and a self-aligning design for heavy-duty arrangements subject to misalignment.

Bearing - 2205 ZKL

25 × 52 × 18 mm. ZKL bearing for industrial applications. When replacing a part, always verify the complete designation, dimensions, design and application requirements against the manufacturer documentation.

Bearing - 6305 F-HTO SKWC GERMANY

25 × 62 × 17 mm. deep-groove ball bearing is a single-row bearing in dimension series 63 for a 25 mm shaft. It carries radial loads and moderate axial loads in both directions and suits accurately aligned, smooth-running rotating assemblies. F-HTO is a manufacturer-specific variant code; verify its exact meaning and operating parameters against the original bearing or technical documentation….

Bearing - 6000 2Z FAG

10 × 26 × 8 mm. Deep groove ball bearing, shielded on both sides (2Z).

Bearing - 30224 A URB

120 × 215 × 43.5 mm. tapered roller bearing is a robust single-row bearing for high radial loads combined with axial load in one direction. Its separable design allows the inner ring with rollers and the outer ring to be mounted independently. For a correct replacement, compare the complete designation including suffix A, the dimensions and required clearance with the original part.

Bearing - 2318 K ZKL

90 × 190 × 64 mm. self-aligning ball bearing has two rows of balls, a common spherical raceway in the outer ring and a tapered K bore. It accommodates angular misalignment between shaft and housing while carrying mainly radial load plus lighter axial load in both directions. It is well suited to positions where shaft deflection or alignment error cannot be fully avoided.

Bearing - UG 208 ER NTN

insert ball bearing is designed for bearing housings with a spherical outside surface and eccentric shaft locking. Size 208 is intended for a 40 mm shaft and has an 80 mm insert outside diameter. Before replacing it, verify the complete code, shape and width dimensions against the original part because ER-design details can differ between manufacturers.

Bearing - CS 210 2RS NEU

50 × 90 × 20 mm. insert ball bearing is a sealed bearing with a 50 mm cylindrical bore and spherical outside surface for installation in a matching housing. Double 2RS contact seals protect the rolling contact area from dust and splashed water while retaining lubricant. When replacing it, also compare the shaft-retention method and housing profile.

Bearing - NJ 207 ZKL

35 × 72 × 17 mm. cylindrical roller bearing is a single-row radial bearing with high load capacity and rigidity. The NJ design has two guiding flanges on the outer ring and one on the inner ring, allowing it to carry radial load, locate the shaft axially in one direction and permit axial displacement in the opposite direction.

Bearing - 6212 2RSR KINEX

60 × 110 × 22 mm. deep-groove ball bearing is a single-row radial bearing with rubber seals on both sides. It carries radial loads and moderate axial forces in either direction. The 2RSR design helps protect the internal rolling contact from dust and moisture while retaining lubricant inside the bearing.

Bearing - 6208 2RS ZKL

40 × 80 × 18 mm. deep-groove ball bearing is a single-row radial bearing with rubber seals on both sides. It carries radial loads and moderate axial forces in either direction. The 2RS design helps protect the internal rolling contact from dust and moisture while retaining lubricant inside the bearing.

Bearing - 30310 A ZKL

50 × 110 × 29.25 mm. tapered roller bearing is a robust single-row bearing for high radial loads combined with axial load in one direction. Its separable design allows the inner ring with rollers and the outer ring to be mounted independently. For a correct replacement, compare the complete designation including suffix A, the dimensions and required clearance with the original part.

Bearing - NA 4901 DKF

12 × 24 × 13 mm. needle roller bearing is a compact radial bearing with machined rings and its own inner ring. Long needle rollers provide high radial load capacity within a small outside diameter. It is suitable where the shaft cannot serve directly as a precision-hardened raceway.

Bearing - 3309 ZKL

45 × 100 × 39.7 mm. double-row angular-contact ball bearing carries high radial loads together with axial forces in both directions. Two ball rows provide rigid axial location and the ability to support tilting moments in a compact unit. It suits positions where a single-row ball bearing does not provide sufficient axial capacity.

Bearing - 6208 2Z INA

40 × 80 × 18 mm. deep-groove ball bearing is a single-row radial bearing with non-contact metal shields on both sides. It supports radial loading and moderate axial forces in either direction. The 2Z shields help retain lubricant and keep out coarse contaminants while maintaining low friction and suitability for higher speeds.

Bearing - 6009 2RS C3 ZKL

45 × 75 × 16 mm. Single-row deep-groove ball bearing with rubber seals on both sides. Check the complete designation and suitability for the specific application.