Bearings, Page 3
Product sorting
List of products
6304 2Z C3 SKF deep-groove ball bearing is a single-row bearing with steel shields on both sides and C3 radial internal clearance. It carries radial loads and moderate axial loads in both directions and is suitable for higher-speed operation.
7204 AA ZKL single-row angular-contact ball bearing is designed for combined radial and axial loads. Under the ZKL designation system, the AA execution has a 26° contact angle and carries axial load in one direction.
Needle roller bearing HK 2012 CX is a thin-walled bearing with a drawn outer cup, cage and needle rollers. Its open-ended design without an inner ring provides high radial load capacity within a very small radial space.
The raceway is normally formed by a hardened and ground shaft surface; when the shaft cannot meet the raceway requirements, a suitable separate inner ring must be used.
Insert bearing UC 204 ZKL is designed for matching bearing housings and units. Its extended inner ring is secured to the shaft by two set screws, enabling quick mounting.
The spherical outside surface facilitates alignment in the housing seat, while seals on both sides help protect the bearing interior from common contaminants.
20x47x14 mm
Higher accuracy class P4
High-precision spindle ball bearing S 6204 C TA P4 GMN for precision arrangements carrying combined radial load and axial load in one direction. The complete C TA P4 design, pairing and required preload must be preserved when replacing it.
20x52x22 mm
Greater radial internal clearance
Double-row angular-contact ball bearing 3304 C3 ZKL for rigid arrangements under combined loads. It carries radial load and axial loads in both directions; C3 clearance provides extra allowance where thermal expansion or tight fits reduce operating clearance.
20x32x7 mm
61804 2RS1 SKF deep groove ball bearing has contact rubber seals on both sides, helping retain lubricant and protect the raceways against contamination and moisture.
Rubber seals on both sides
20x47x14 mm
CT 1204 MGK self-aligning ball bearing with two rows of balls compensates minor shaft-to-housing misalignment. The MGK suffix is part of the full designation, which should always be compared when selecting a bearing.
Metal shields on both sides
20x47x14 mm
ZKL 1204 self-aligning ball bearing with two rows of balls compensates minor shaft-to-housing misalignment. It is intended mainly for radial loads and limited axial loads in both directions. The K suffix is part of the full designation, which should always be compared when selecting a bearing.
Injection moulded cage of glass fibre reinforced polyamide 66
20x35x10 mm
FAG 51104 thrust ball bearing is designed to carry axial load in one direction. It is used where force acting along the shaft axis must be reliably supported.
20x47x18 mm
SKF bearing with the complete designation 4204 ATN9 SKF. When selecting a replacement, compare the full designation, dimensions and design required for the application.
