Bearings, Page 35

Bearing - 6410 ZVL

50 × 130 × 31 mm. Rolling bearing for use in machinery and equipment.

Bearing - 61804 2RS1 SKF

20 × 32 × 7 mm. deep groove ball bearing has contact rubber seals on both sides, helping retain lubricant and protect the raceways against contamination and moisture.

Bearing - 51211 ZKL

55 × 90 × 22 mm. single-direction thrust ball bearing is designed to carry axial load in one direction. Its separable construction consists of a shaft washer, a housing washer and a ball-and-cage assembly.

Bearing - 51109 ZKL

45 × 65 × 14 mm. thrust ball bearing is designed to carry axial load in one direction. It is used where force acting along the shaft axis must be reliably supported.

Bearing - 1207 P6 ZKL

35 × 72 × 17 mm. ZKL bearing for industrial applications. When replacing a part, always verify the complete designation, dimensions, design and application requirements against the manufacturer documentation.

Bearing - 30210 GPZ

50 × 90 × 21.75 mm. single-row tapered roller bearing carries high radial load together with axial load in one direction. Its separable inner assembly with rollers and separate outer ring simplify mounting.

Bearing - 22212 ZKL

60 × 110 × 28 mm. double-row spherical roller bearing with a cylindrical bore carries high radial loads and axial loads in both directions. Its self-aligning design helps accommodate slight misalignment and shaft deflection.

Bearing - NK 25/20 INA

INA NK25/20 needle roller cage, 25 × 33 × 20 mm, without a seal.

Bearing - NJ 304 E DPI

20 × 52 × 15 mm. Technické provedení a kompatibilitu ověřte podle úplného označení výrobce a požadavků aplikace.

Bearing - 6301 2RS ZKL

12 × 37 × 12 mm. Rubber seals on both sides.

Bearing - 6307 Z ZKL

35 × 80 × 21 mm. deep groove ball bearing has a non-contact metal shield on one side. The shield limits the ingress of larger contaminants and lubricant loss while retaining low friction; the opposite side remains open.

Bearing - 6307 2RS C3 ZKL

35 × 80 × 21 mm. Rubber seals on both sides. Greater radial internal clearance.

Bearing - 22309 J ZKL

45 × 100 × 36 mm. Bearing for industrial rotating assemblies. Before selection, verify the complete designation, dimensions and requirements of the specific application.

Bearing - NU 207 BP6 NA ZKL

35 × 72 × 17 mm. Technické provedení a kompatibilitu ověřte podle úplného označení výrobce a požadavků aplikace.

Bearing - 6301 2Z SKF

12 × 37 × 12 mm. Metal shields on both sides.

Bearing - 624 2Z SKF

4 × 13 × 5 mm. Metal shields on both sides.