Bearings, Page 7
Product sorting
Brands
Inner diameter d (mm)
Outer diameter D (mm)
Width B (mm)
List of products
Bearing - 6205 2Z SKF
25 × 52 × 15 mm. single-row deep groove ball bearing with non-contact metal shields on both sides. It combines low friction and lubricant retention with reliable radial and moderate axial load support in both directions.
Bearing - 30204 A KLF
20 × 47 × 15.25 mm. single-row tapered roller bearing for combined radial and axial loads acting in one direction. Its separable design simplifies installation and accurate clearance adjustment.
Bearing - 6006 2RS ZVL
30 × 55 × 13 mm. Single-row deep-groove ball bearing with rubber seals on both sides. Check the complete designation and suitability for the specific application.
Bearing - 3206 ZKL
30 × 62 × 23 mm. double-row angular contact ball bearing for combined radial and axial loads in both directions. Its compact design provides rigid and accurate shaft guidance.
Bearing - 6306 2RS ZKL
30 × 72 × 19 mm. Single-row deep-groove ball bearing. Rubber seals on both sides; compare the complete designation before ordering.
Bearing - 6305 2ZR ZVL
25 × 62 × 17 mm. single-row deep groove ball bearing with non-contact metal shields on both sides. Suitable for radial and moderate axial loads in both directions, combining low friction with protection of the lubricant from larger contaminants.
Bearing - 3306 ZKL
30 × 72 × 30.2 mm. Double-row angular contact ball bearing for combined radial and axial loads in both directions.
Bearing - 6213 ZKL
65 × 120 × 23 mm. bearing with clearly stated mounting dimensions. The product name gives no suffix for closure or clearance; compare the complete marking on the original bearing before replacement.
Bearing - 627 ZKL
7 × 22 × 7 mm. single-row deep groove ball bearing in an open design. Deep raceways carry radial and moderate axial loads in both directions with low friction.
Bearing - 6307 2RS1 SKF
35 × 80 × 21 mm. bearing for replacement use. Before ordering, compare the complete designation and verify the dimensions, design and fit with the original part. Confirm compatibility against SKF documentation and the requirements of the specific application.
Bearing - 6200 2RS CRAFT
10 × 30 × 9 mm. single-row deep groove ball bearing with contact rubber seals on both sides. It carries radial and moderate axial loads in both directions while protecting the rolling elements from dust, contamination and lubricant loss.
Bearing - PLC 65 4 ZKL
bearing for accurate replacement by the complete original-part designation.
Bearing - 6010 ROLLWAY
50 × 80 × 16 mm. deep-groove ball bearing is a single-row radial bearing in the slim 60 series for a 50 mm shaft. Deep raceways support radial loads and moderate axial forces in both directions with low friction. The open design suits clean, correctly lubricated assemblies or machines that provide separate external protection.
Bearing - 6307 ZKL
35 × 80 × 21 mm. single-row deep groove ball bearing in an open design. Deep raceways carry radial and moderate axial loads in both directions with low friction.
Bearing - NX 10 Z XL INA
Metal shield on one side combined needle roller and axial ball bearing, dimensions 10 × 19 × 18 mm. One compact unit carries radial load together with axial load acting in one direction.
Bearing - 6211 2RS C3 SKF
55 × 100 × 21 mm. Single-row deep-groove ball bearing. Rubber seals on both sides; C3 means greater radial internal clearance, so verify suitability.
Bearing - 6204 2RS MTM
20 × 47 × 14 mm. Single-row deep-groove ball bearing. Rubber seals on both sides; compare the complete designation before ordering.
Bearing - 6005 2RS ZVL
25 × 47 × 12 mm. Single-row deep-groove ball bearing with rubber seals on both sides. Check the complete designation and suitability for the specific application.