Bearings, Page 8
Product sorting
Brands
Inner diameter d (mm)
Outer diameter D (mm)
Width B (mm)
List of products
Bearing - 6010 A ZKL
50 × 80 × 16 mm. bearing with verified mounting dimensions; compare the complete A suffix before replacement.
Bearing - 696 2Z neu
6 × 15 × 5 mm. single-row deep groove ball bearing with non-contact metal shields on both sides. It combines low friction and lubricant retention with reliable radial and moderate axial load support in both directions.
Bearing - 624 ZKL
4 × 13 × 5 mm. single-row deep groove ball bearing in an open design. Deep raceways carry radial and moderate axial loads in both directions with low friction.
Bearing - 6305 2RS ZKL
25 × 62 × 17 mm. single-row deep groove ball bearing with contact rubber seals on both sides. It carries radial and moderate axial loads in both directions while protecting the rolling elements from dust, contamination and lubricant loss.
Bearing - 608 2RS TIMKEN
8 × 22 × 7 mm. single-row deep groove ball bearing with contact rubber seals on both sides. It carries radial and moderate axial loads in both directions while protecting the rolling elements from dust, contamination and lubricant loss.
Bearing - 6010 ZVL
50 × 80 × 16 mm. single-row deep groove ball bearing in an open design. Deep raceways carry radial and moderate axial loads in both directions with low friction.
Bearing - 629 ZKL
9 × 26 × 8 mm. single-row deep groove ball bearing in an open design. Deep raceways carry radial and moderate axial loads in both directions with low friction.
Bearing - 6002 2Z YUG
15 × 32 × 9 mm. single-row deep groove ball bearing with non-contact metal shields on both sides. It combines low friction and lubricant retention with reliable radial and moderate axial load support in both directions.
Bearing - 6305 2Z C3 GJN SKF
25 × 62 × 17 mm. Single-row SKF Explorer 6305-2Z/C3GJN deep groove ball bearing with non-contact sheet-steel shields on both sides and C3 radial internal clearance. The grease-lubricated design is suitable for high rotational speeds.
Bearing - 6004 2RS SKF
20 × 42 × 12 mm. Single-row deep-groove ball bearing. Rubber seals on both sides; compare the complete designation before ordering.
Bearing - 6303 Z ZKL
17 × 47 × 14 mm. single-row deep groove ball bearing with a non-contact metal shield on one side. It combines low friction and lubricant retention with reliable radial and moderate axial load support in both directions.
Bearing - NU 206 ZKL
30 × 62 × 16 mm. Single-row cylindrical roller bearing in NU design. High radial capacity and axial displacement in both directions; compare the complete designation.
Bearing - 6201 RS ZKL
12 × 32 × 10 mm. Single-row deep-groove ball bearing. Rubber seal on one side; compare the complete designation before ordering.
Bearing - 6201 Z BMZ
12 × 32 × 10 mm. Single-row deep-groove ball bearing. Metal shield on one side; compare the complete designation, including suffixes.
Bearing - 6209 2RS ZKL
45 × 85 × 19 mm. Single-row deep groove ball bearing with contact rubber seals on both sides. It carries radial and limited axial loads in both directions; the seals retain lubricant and protect the rolling contact from contaminants.
Bearing - 6201 C 2Z FAG
12 × 32 × 10 mm. single-row deep groove ball bearing with non-contact metal shields on both sides. It combines low friction and lubricant retention with reliable radial and moderate axial load support in both directions. The FAG Generation C design is optimised for low friction and quiet running.
Bearing - 3004 2RS C3 FAG
Rubber seals on both sides 20 × 42 × 16 mm double-row angular contact ball bearing for combined radial and axial loads in both directions. The C3 version has greater axial internal clearance than standard CN.
