Bearing - SS 6200 2RS CX

Bearing - 16115 STEYR

75 × 110 × 12 mm. Open single-row deep-groove ball bearing with a slim cross-section. The unshielded and unsealed design provides direct access for lubrication but requires a clean and suitably lubricated installation.

Needle roller bearing - HK 1612 INA

16 × 22 × 12 mm. INA needle roller bearing HK 1612 for replacement use. Before ordering, compare the complete designation and verify dimensions, design and fit with the original part. Confirm compatibility using manufacturer documentation and the requirements of the specific application.

Bearing - NU 2207 ZKL

35 × 72 × 23 mm. single-row cylindrical roller bearing for high radial loads. The NU design has two integral flanges on the outer ring and permits axial displacement of the shaft relative to the housing in both directions, making it suitable for a non-locating bearing position.

Bearing - 3003 2RS C4 INA

17 × 35 × 14 mm. Rubber seals on both sides. Large radial internal clearance.

Bearing - 6201 2RSR FAG

12 × 32 × 10 mm. Single-row FAG 6201-2RSR deep groove ball bearing with seals on both sides and a sheet-steel cage. A versatile design for radial loads and axial loads in both directions.

Bearing - 7205 CTRDULP3 (2 páry) NSK

25 × 52 × 15 mm. Bearing 7205 CTRDULP3 (2 pairs) NSK.

Bearing - 61824 2RS Y INA

120 × 150 × 16 mm. 2RS rubber seals on both sides, Y pressed brass cage.

Bearing - UC 206 MGK

30 × 62 × 38.1 mm. Technické provedení a kompatibilitu ověřte podle úplného označení výrobce a požadavků aplikace.

Spherical plain bearing - GAKFL 14 PB ELGES

14 × 28 × 19 mm. ELGES needle roller bearing GAKFL 14 PB for replacement use. Before ordering, compare the complete designation and verify dimensions, design and fit with the original part. Confirm compatibility using manufacturer documentation and the requirements of the specific application.

Bearing - 1308 K STEYR

40 × 90 × 23 mm. ball bearing for replacement use. Before ordering, compare the complete designation and verify the dimensions, design and fit with the original part. Confirm compatibility against STEYR documentation and the requirements of the specific application.

Bearing - 6203 2RS KINEX

17 × 40 × 12 mm. single-row deep groove ball bearing with contact rubber seals on both sides. A compact solution for radial and moderate axial loads in both directions, protected against dust, contamination and lubricant loss.

Bearing - 61805 2RS SKF

25 × 37 × 7 mm. Single-row deep groove ball bearing with compact dimensions; the corresponding SKF catalogue designation is 61805-2RS1. Contact seals on both sides help retain the grease and protect the bearing against contamination.