ZVL, Page 2
We can arrange delivery of almost any ZVL product, even if it is not currently listed in our catalogue.
Send us the designation, a photo of the nameplate, dimensions or a description of the application, and we will check availability.
ZVL – product identification and supply
The ZVL designation may appear on different technical products and spare parts. To identify the exact item reliably, we therefore work from the complete marking and the available technical data.
The exact item should be selected by its complete designation and technical parameters. Dimensions, design, material and operating conditions are important when matching a replacement.
For an accurate quotation, please provide the full marking, required quantity and any available documentation. We will compare the specification and verify a suitable delivery option.
Product sorting
List of products
25x62x17 mm
6305 2ZR ZVL single-row deep groove ball bearing with non-contact metal shields on both sides. Suitable for radial and moderate axial loads in both directions, combining low friction with protection of the lubricant from larger contaminants.
30x62x16 mm
6206 2RS ZVL single-row deep groove ball bearing with contact rubber seals on both sides. It carries radial and moderate axial loads in both directions while protecting the rolling elements from dust, contamination and lubricant loss.
30x55x13 mm
6006 2RS ZVL single-row deep groove ball bearing with contact rubber seals on both sides. It carries radial and moderate axial loads in both directions while protecting the rolling elements from dust, contamination and lubricant loss.
50x80x16 mm
6010 ZVL single-row deep groove ball bearing in an open design. Deep raceways carry radial and moderate axial loads in both directions with low friction.
12x37x12 mm
6301 2RS ZVL deep-groove ball bearing with rubber seals on both sides.
25x47x12 mm
ZVL single-row deep groove ball bearing with rubber seals on both sides (2RS).
30x47x9 mm
61906 2RS ZVL deep-groove ball bearing with rubber seals on both sides.
17x47x14 mm
6303 2Z ZVL deep-groove ball bearing with metal shields on both sides.
17x35x10 mm
ZVL 6003 2RS single-row deep-groove ball bearing with rubber seals on both sides. A versatile design for radial and limited axial loads in both directions, protected against common contaminants.
17x30x7 mm
Rubber seals on both sides. Thin-section ZVL single-row deep groove ball bearing for installations with limited radial space.
30x55x13 mm
ZVL 6006 single-row open deep groove ball bearing for radial and axial loads in both directions. Dynamic load rating 13.24 kN, mass 0.111 kg.
25x47x15 mm
ZVL 32005 AX single-row tapered roller bearing for combined radial and one-direction axial loads; the separable design requires correct clearance or preload adjustment.
55x78x16 mm
ZVL 51111 thrust ball bearing is designed to carry axial load in one direction. It is used where force acting along the shaft axis must be reliably supported.
65x100x18 mm
ZVL 6013 2RS single-row deep-groove ball bearing with rubber seals on both sides for improved protection of the lubricant and raceways in normally dusty or damp operation.
40x80x23 mm
NU 2208 E ZVL is a single-row cylindrical roller bearing for high radial loads. The NU design permits axial displacement of the shaft relative to the housing in both directions and is suited to non-locating positions.
10x30x9 mm
6200 2RS ZVL is a single-row deep-groove ball bearing with contact rubber seals on both sides. It supports radial and limited axial loads while protecting the lubricant and raceways in commonly contaminated operation.
17x35x10 mm
6003 2Z ZVL is a single-row deep-groove ball bearing with two non-contact metal shields. Its versatile design supports radial load and moderate axial loads in both directions, while low friction makes it suitable for higher speeds.
The shields help retain lubricant and limit the entry of larger contaminants. This is a general-purpose machine bearing, not a contact-sealed or watertight design.
30x62x16 mm
6206 2ZR ZVL single-row deep-groove ball bearing with metal shields on both sides for lubricant protection and low friction.