25 × 42 × 9 mm. The thin-section deep-groove ball bearing is a compact single-row bearing with contact rubber seals on both sides. It combines a small radial cross-section and low weight with the ability to support radial loads and moderate axial forces in both directions. Suitable for small electric motors, instruments, gearboxes, robotics and other mechanisms with restricted radial space.
50 × 90 × 20 mm. The deep-groove ball bearing is a single-row radial bearing with a snap-ring groove in the outer ring. The groove simplifies axial location in the housing, while the deep raceways support radial loads and moderate axial forces in both directions. This open, unsealed design is suitable for gearboxes, electric motors and industrial positions with a separate lubrication system.
65 × 140 × 33 mm. deep-groove ball bearing is an open single-row bearing with a solid brass or bronze cage (M), P6 accuracy and greater-than-normal C3 radial clearance (P63). It carries radial loads and axial loads in both directions.
30 × 62 × 20 mm. Rubber seals on both sides. The deep-groove ball bearing is a single-row bearing with contact seals on both sides. Its 30 × 62 × 20 mm dimensions, factory grease fill and effective lubricant retention make it suitable for compact, protected bearing arrangements.
65 × 120 × 23 mm. deep-groove ball bearing is an open single-row bearing with greater-than-normal C3 radial internal clearance. It carries radial loads and moderate axial loads in both directions and suits arrangements where interference fits or operating temperatures reduce internal clearance.
65 × 120 × 23 mm. deep-groove ball bearing is a single-row bearing with contact rubber seals on both sides. It carries radial loads and moderate axial loads in both directions, while the factory grease is protected against leakage and common contaminants.
80 × 125 × 22 mm. deep-groove ball bearing is a thin-section single-row bearing with non-contact metal shields on both sides (2ZR) and greater-than-normal C3 radial clearance. It combines low friction, high-speed capability and protection of the factory lubricant against common dust.
20 × 47 × 14 mm. deep-groove ball bearing is an open single-row bearing with greater-than-normal C3 radial internal clearance. It carries radial loads and moderate axial loads in both directions and suits arrangements where interference fits or operating temperatures reduce internal clearance.
20 × 37 × 9 mm. deep-groove ball bearing is a single-row bearing with contact rubber seals on both sides. It carries radial loads and moderate axial loads in both directions, while the factory grease is protected against leakage and common contaminants.
25 × 62 × 17 mm. deep-groove ball bearing is a single-row bearing with steel shields on both sides and C3 radial internal clearance. It carries radial loads and moderate axial loads in both directions and is suitable for higher-speed operation.
20 × 52 × 15 mm. deep-groove ball bearing is a. Generation C single-row bearing with HRS contact seals on both sides and C3 radial internal clearance. It combines reliable grease protection with low friction and carries radial loads and moderate axial loads in both directions.
40 × 68 × 15 mm. deep-groove ball bearing is a single-row bearing with rubber seals on both sides. It carries radial loads and moderate axial loads in both directions while protecting the factory grease against leakage and common contaminants.
70 × 110 × 20 mm. deep-groove ball bearing is a single-row bearing with RSR contact seals on both sides. It carries radial loads and moderate axial loads in both directions while protecting the factory grease against leakage, dust and moisture.
