12 × 37 × 12 mm. single-row deep groove ball bearing with a non-contact metal shield on one side. Suitable for radial and moderate axial loads in both directions when one side of the bearing needs protection from coarse contamination.
35 × 72 × 17 mm. single-row deep groove ball bearing with a contact rubber seal on one side. Suitable for radial and moderate axial loads in both directions when one side requires improved protection from dust, contamination and lubricant loss.
12 × 32 × 10 mm. single-row deep groove ball bearing in an open design is a versatile choice for radial loads and moderate axial loads in both directions. It offers low friction and smooth running.
25 × 42 × 11 mm. thrust ball bearing is designed to carry axial load in one direction. It is used where force acting along the shaft axis must be reliably supported.
35 × 80 × 21 mm. single-row deep groove ball bearing with contact rubber seals on both sides. A dependable choice for radial and bidirectional axial loads where retaining lubricant and protecting the bearing interior from contamination are important.
10 × 26 × 8 mm. deep groove ball bearing has contact rubber seals on both sides and greater-than-normal C3 radial internal clearance. The seals protect lubricant and raceways, while C3 provides allowance for clearance reduction caused by fits or operating temperature.
30 × 72 × 19 mm. MGM bearing for industrial applications. When replacing a part, always verify the complete designation, dimensions, design and application requirements against the manufacturer documentation.
45 × 85 × 19 mm. SKF bearing for industrial applications. When replacing a part, always verify the complete designation, dimensions, design and application requirements against the manufacturer documentation.
50 × 110 × 27 mm. ZKL bearing for industrial applications. When replacing a part, always verify the complete designation, dimensions, design and application requirements against the manufacturer documentation.
25 × 62 × 17 mm. HARP bearing for industrial applications. When replacing a part, always verify the complete designation, dimensions, design and application requirements against the manufacturer documentation.
40 × 80 × 18 mm. deep groove ball bearing has contact rubber seals on both sides, helping retain lubricant and protect the raceways against contamination and moisture.
17 × 35 × 12 mm. thrust ball bearing is designed to carry axial load in one direction. It is used where force acting along the shaft axis must be reliably supported.
35 × 72 × 42.9 mm. insert ball bearing with an extended inner ring is secured to the shaft by two grub screws. Its spherical outer surface is designed for installation in a matching bearing housing.
12 × 37 × 12 mm. deep groove ball bearing has contact rubber seals on both sides, helping retain lubricant and protect the raceways against contamination and moisture.
