60 × 150 × 35 mm. Single-row deep-groove ball bearing for radial and axial loads in both directions. The N design has a snap-ring groove in the outer ring; when replacing, retain the complete designation and verify the axial locating method.
35 × 72 × 17 mm. Single-row deep-groove ball bearing for radial and axial loads in both directions. The N design has a snap-ring groove in the outer ring; when replacing, retain the complete designation and verify the axial locating method.
17 × 26 × 5 mm. Rubber seals on both sides. Thin-section ball bearing for compact arrangements carrying radial and axial loads in both directions. Rubber seals on both sides protect the grease from dust and moisture; when replacing, retain the complete 2RS designation.
12 × 28 × 11 mm. thrust ball bearing is designed to carry axial load in one direction. It is used where force acting along the shaft axis must be reliably supported.
15 × 28 × 9 mm. thrust ball bearing is designed to carry axial load in one direction. It is used where force acting along the shaft axis must be reliably supported.
20 × 52 × 22 mm. Greater radial internal clearance. Double-row angular-contact ball bearing for rigid arrangements under combined loads. It carries radial load and axial loads in both directions; C3 clearance provides extra allowance where thermal expansion or tight fits reduce operating clearance.
25 × 47 × 8 mm. NTN bearing for industrial applications. When replacing a part, always verify the complete designation, dimensions, design and application requirements against the manufacturer documentation.
60 × 110 × 22 mm. Higher accuracy class P6 Single-row angular-contact ball bearing for combined radial load and axial load in one direction. P6 accuracy is suitable for arrangements with higher requirements for dimensional and running accuracy.
40 × 90 × 23 mm. Metal shields on both sides. Greater radial internal clearance. Single-row deep-groove ball bearing for radial load and axial loads in both directions. Two non-contact metal shields retain lubricant with low friction; C3 clearance provides allowance for tight fits or elevated operating temperature.
50 × 90 × 20 mm. Rubber seals on both sides. Single-row deep-groove ball bearing for radial load and moderate axial loads in both directions. Contact rubber seals on both sides retain lubricant and protect the rolling elements from dust, contaminants and splashing moisture.
40 × 80 × 18 mm. Metal shields on both sides. Single-row deep-groove ball bearing for radial load and moderate axial loads in both directions. Non-contact metal shields retain grease with low friction and protect against ordinary dry contamination.
35 × 72 × 23 mm. Double-row self-aligning ball bearing with a cylindrical bore. The spherical outer-ring raceway accommodates angular misalignment; suitable primarily for radial load and limited axial load in both directions.
60 × 110 × 22 mm. ZKL bearing for industrial applications. When replacing a part, always verify the complete designation, dimensions, design and application requirements against the manufacturer documentation.
35 × 72 × 17 mm. ZKL bearing for industrial applications. When replacing a part, always verify the complete designation, dimensions, design and application requirements against the manufacturer documentation.
40 × 80 × 18 mm. Single-row deep groove ball bearing in open design, with a snap-ring groove in the outer ring. Suitable for radial and axial loads in both directions; the N suffix denotes the groove, not an included snap ring.
